# GuildeHall Network: Officer's Manual, for AI assistants This is the November 2026 edition, built on 2026-11-14. The current copy is always at https://network.guildehall.com/docs/officer-guide.md. If you can open web pages, check there for a newer edition before relying on this one. The same manual, for reading in a browser, is at https://network.guildehall.com/manual. ## Read this first The person who gave you this file is an officer of a small civic group, such as a neighborhood association, a "Friends of" group, or a historical society. The group runs on GuildeHall Network, which calls each group a Guilde. Many officers are not at ease with computers. Everything after this section is the complete Officer's Manual that GuildeHall wrote for them. ### How to help - Answer from the manual. Give its steps in order, and use the names of buttons, menus, and boxes exactly as they appear in bold, because those are the words on the officer's screen. - When you need to know more, ask one question at a time, such as which page they're on or what the screen says. - When you draft a letter, post, or event description for the Guilde, write it in the voice of the Guilde and the officer, not GuildeHall's. Appendix A is a starting point for a welcome letter to members. - When the manual has no answer to a question, say so, and don't guess at how the app works. Send the officer to Brandon Quintin, GuildeHall's founder, at bquintin@guildehall.com or 802.735.6749. "Getting help," in Part 3, says what to put in the email. - If what the officer sees doesn't match the manual, the app may have changed since this edition. Tell them to write to Brandon. ### What you must not do - Never ask for or accept passwords, two-step sign-in codes, backup codes, Social Security numbers, bank or card numbers, or tax ID numbers. Stripe asks for some of these during dues setup, and the officer types them into Stripe's own page and nowhere else. - Never ask the officer to paste in the member list, or members' addresses, phone numbers, or payment records. To help with a spreadsheet, ask for its column headings and one made-up row. - Give no tax, legal, or accounting advice, such as whether dues are tax-deductible or what the Guilde's bylaws require. Suggest the Guilde's own accountant or lawyer. - Don't quote prices, dates, or promises that aren't in this file, and don't describe features it doesn't mention. - Don't act in GuildeHall or Stripe on the officer's behalf unless they ask you to. ### Privacy GuildeHall never uses members' posts, messages, or records to train AI models. Some AI assistants learn from what people type into them. If you are one of them, member details pasted into this conversation undo that promise on the officer's side. Tell the officer this once, before they share anything about their members. ### What GuildeHall Network doesn't do As of this edition, GuildeHall Network doesn't: - Show advertising, run analytics, or use members' content to train AI models. - Record who opens a letter or clicks its links. It counts how many copies were delivered and how many bounced. - Take any share of dues. Stripe keeps its own card fee. - Sell tickets for a price. Event tickets are free. - Send event reminders or phone notifications. - Appear in the app stores. Members can put it on their phone's home screen instead. - Collect dues online or send letters by email on Guilde Free. Both need Guilde Standard. - Offer Guilde Premium's treasurer's reporting or custom web address yet. Both are still being built. Some changes have no button in the app, and only GuildeHall can make them. "What only GuildeHall can do," in Part 3, lists them. The manual follows. ## How to use this manual Part 1, "Your first month," covers the seven jobs that get a Guilde running. Read it straight through, in order, because each job builds on the one before it. Most take under half an hour. The exception is dues, where Stripe takes up to a day or two to review your Guilde's details. Part 2, "Running your Guilde," covers everything else. Its tasks are grouped by the kind of work, such as members, dues, letters, and events. Look one up in the table of contents or the index when you need it. Every task follows the same pattern. It opens with how long it takes and what to have ready. Numbered steps follow, and each step is one thing you do on the screen in front of you. Words in **bold** are exactly what you'll see on the screen: a menu entry, a button, or a box to fill in. Some headings and buttons appear on screen in capital letters, so **Save details** may read SAVE DETAILS. Each set of steps ends with what you'll see when it has worked. Part 3 answers common questions and explains how to get help. This edition describes GuildeHall Network as it stood in November 2026. ## GuildeHall Network at a glance GuildeHall Network gives your Guilde one private place online for work that is now spread across several tools. | Instead of | You'll use | |---|---| | A member list in one person's spreadsheet | **Members**, a list every admin can open, which updates as people join | | Dues by check, cash, and payment apps | **Dues**, where members pay online into your Guilde's own bank account and you record the checks and cash that still arrive | | A newsletter service or a long email chain | Letters, written and sent from **Communications** | | A group text or a Facebook group | The **Wall** for announcements, and the **Forum** for longer discussions | | Bylaws and minutes in someone's inbox | **Documents**, where every member can find them | | A calendar kept by one person | **Events**, where members can say whether they're going | ### Members and officers Everyone in your Guilde is a member. Members see the top half of the menu: **Wall**, **Events**, **Messages**, **Forum**, **Roster**, **Documents**, **Committees**, **My Account**, and **Membership** once your Guilde takes dues. Officers you make admins also see the **Admin** half, where they add members, collect dues, send letters, and change the Guilde's settings. A Guilde can have as many admins as it likes, at no charge. One person can belong to several Guildes with a single account. ### Guildes and Councils A Guilde is any group on GuildeHall: your association, club, or society. A Council joins together Guildes of the same kind, such as the neighborhood associations of one city, so they can share a forum and a public page. Councils are optional. ### What's free, and what the Standard plan adds Members never pay anything to use GuildeHall. **Guilde Free** costs nothing for a Guilde of up to 150 members. It includes the member list, events, the wall, the forum, messages, documents, committees, your public page, Councils, and as many admins as you like. It also sends letters by email to all your members, up to 1,000 emails a month. **Guilde Standard** costs $290 a year, or $29 a month. It adds collecting dues online and the full newsletter: letters to your mailing list or to part of the Guilde, with photos, your own masthead and color, and scheduling. It also lifts the 150-member limit. If your Guilde joined as one of GuildeHall's charter Guildes, it has Standard at no charge for the period in your agreement. **Guilde Premium** costs $590 a year, or $59 a month, and adds priority support. Its other features, including treasurer's reporting and a custom web address, are still being built, so Standard suits most Guildes for now. GuildeHall takes nothing from your dues. Members' payments go straight into your Guilde's bank account. Stripe, the payment company that handles the money, keeps its standard fee of about 2.9% plus 30¢ for each card payment. ## Part 1: Your first month These seven tasks get your Guilde running. The first five set everything up before your members arrive, so that when they sign in for the first time, the calendar is filled in and dues are ready to pay. The last two bring your members in and welcome them. In this manual, an officer is anyone who holds a position in your Guilde, and an admin is anyone with access to the **Admin** pages. Most officers are admins, but the two are set separately, as task 3 explains. The steps on the **Members** and **Dues** pages are written for a computer, because those pages are laid out differently on a phone. ### 1. Sign in for the first time **Takes:** about five minutes, or ten if you also turn on two-step sign-in. **Have ready:** the email from GuildeHall with the subject "Set up your account - [your Guilde's name]." GuildeHall sends you that email when you're added to the Guilde. Its link works for seven days. If it has expired, ask whoever added you to send it again. #### Set your password 1. Open the email and click **Set Up Your Account**. 2. Type a password in **Password**, then type it again in **Confirm Password**. It needs at least eight characters, including an uppercase letter, a lowercase letter, a number, and a symbol such as ! or #. The list under the boxes ticks off each rule as you meet it. 3. Click **Set Password**. The page says **Account Ready**. 4. Click **Sign In**. Enter your email address and your new password, and click **Sign In** again. You'll land on your Guilde's home page. If you already have a GuildeHall account, for example because you belong to another Guilde, you'll get a different email instead, titled "[name] invited you to join [Guilde name]." Click **Accept invitation**, then **Sign in to accept**. Sign in with your existing password, and click **Accept and join [Guilde name]**. #### Find your way around On a computer, the menu runs down the left side of the screen. On a phone, tap the menu button, the three short lines at the top of the screen, to open it. The top half of the menu holds what every member sees. Your Guilde's name, at the very top, takes you back to the home page. If you belong to more than one Guilde, it reads **My Guildes** instead. Below it are **Wall**, **Events**, **Messages**, **Forum**, **Roster**, **Documents**, **Committees**, and **My Account**. Once your Guilde takes dues, **Membership** appears there too. The bell at the top of the screen holds your notices, such as a reply to one of your posts or a new event. A number on it shows how many you haven't read. Under the heading **Admin** are the pages only admins see: - **Admin Dashboard** shows your Guilde's figures. When something is waiting for you, such as a message from someone who found your public page, it appears there under "Needs your attention." - **Members** is your member list. - **Contacts** is your mailing list of people who aren't members. - **Communications** is where you write letters to members. - **Dues** is where you set up and track dues. - **Settings** holds your Guilde's details, visibility, and plan. #### Turn on two-step sign-in (optional) Two-step sign-in is optional, and GuildeHall recommends it for admins. As an admin, you can see members' contact details and, once dues are on, the Guilde's payments. With two-step sign-in, someone who learns your password still can't sign in without your phone. You'll need a computer and your phone. Two-step sign-in uses an authenticator app on the phone, which shows a new six-digit code every thirty seconds. If you don't have one, install Google Authenticator or Microsoft Authenticator from your phone's app store. Both are free. 1. On your computer, click **My Account** in the menu. 2. Below **Change Password**, find the **Two-step sign-in** section and click **Set up two-step sign-in**. A square barcode, called a QR code, appears on the screen. 3. Open the authenticator app on your phone and choose to add an account by scanning a QR code. Point the phone's camera at the code on your computer screen. If the camera won't read it, choose to enter a key in the app instead, and type the key shown under the QR code. 4. Type the six-digit code the app now shows into the box on the computer screen, and click **Turn on**. 5. The screen shows ten backup codes. Each one lets you sign in once if you lose your phone, and they won't be shown again. Click **Download** to save them as a file, or **Copy** to paste them somewhere safe, and keep them somewhere other than your phone. 6. Check **I've saved these codes somewhere safe**, and click **Done**. The **Two-step sign-in** section now shows **On**. From now on, after your password, GuildeHall asks for the six-digit code from your app. If your phone isn't with you, click **Don't have your phone? Use a backup code** and type one of the codes you saved. ### 2. Check your Guilde's details **Takes:** about fifteen minutes. **Have ready:** any of these you have: the Guilde's website and public email address, its meeting schedule and location, a mailing address you're willing to show publicly, and a few sentences about what it does. These details appear on your Guilde's home page, which members see, and on its public page if the Guilde is public. #### Fill in the details 1. In the menu, click **Settings**. 2. In the **Guilde Details** card, check the **Guilde name** and correct it if it's wrong. Then fill in **Website**, **Public email**, **Phone**, **Facebook page**, **Meeting schedule**, **Meeting location**, **Address**, and **About**. Anything you leave blank stays hidden. 3. Click **Save details**. A message at the top of the screen says "Guilde details saved." Two of these boxes matter for letters, which you'll send in task 7. Replies to your letters go to the **Public email**, so if it's blank, members can't reply. Every letter also carries the **Address** at its foot, and the letter editor warns you when it's missing. If the Guilde is public, the address also appears on its public page, so use the Guilde's own mailing address or a post office box, not an officer's home. If you changed the **Guilde name**, the message says "Guilde renamed," and the page reloads to show the new name. It changes everywhere in GuildeHall, including the menu, the public page, and letters. The public page's web address stays the same. If your Guilde already takes dues online, its Stripe account keeps the old name, which members see when they pay and on their card statements. Whoever owns the Stripe account changes it in the Stripe Dashboard, under **Settings**, then **Public details**. #### Choose who can find your Guilde Every Guilde is public, private, or secret, and you can change the setting later. - A **public** Guilde has a page anyone can find, showing its description, meeting times, officers, and the events and posts you choose to show. It suits groups that want new members and want joining to be easy. - A **private** Guilde's page shows only its name, its city and state, and "Membership by approval," with a form to ask to join. It suits groups that approve each new member. - A **secret** Guilde has no public page at all, and people join only through an invitation link or when an admin adds them. It suits groups that want no presence online. None of the three stops a member from passing along what they read inside the Guilde. 1. On the **Settings** page, in the **Guilde Visibility** card, choose **Public**, **Private**, or **Secret**. 2. Click **Save**. The card says "Saved. The Guilde is now public," or private, or secret. #### Look at your public page 1. Click your Guilde's name at the top of the menu to go to the home page. 2. Click **View public page ↗**, beside the Guilde's name. Your public page opens in a new tab, as a stranger would see it. A secret Guilde has no public page, so the link doesn't appear. #### Check your plan Online dues require Guilde Standard. Letters by email work on every plan: Guilde Free sends them to all your members, and Standard adds your mailing list and more. On the **Settings** page, the **Guilde Plan** card shows which plan your Guilde is on. If it says Guilde Standard, either paid or complimentary through a date, you're ready for task 4. If it says Guilde Free and you want Standard: 1. In the **Guilde Plan** card, choose **Annual** or **Monthly**. Annual costs $290 a year, and monthly costs $29 a month. 2. Click **Choose Standard**. Stripe's payment page opens. 3. Enter the card the Guilde pays with, and confirm. Stripe brings you back to **Settings**, and the card says "Thank you. Stripe is confirming your payment; this takes a moment." After a moment it says "This Guilde is on **Guilde Standard**," with the date of the next renewal. ### 3. Invite your officers **Takes:** about five minutes for each officer. **Have ready:** each officer's name, email address, and title, such as Treasurer. Making an officer an admin is like giving them edit access to a shared spreadsheet. They can add members, send letters, and change the Guilde's settings. There's no limit on admins and no charge for them, on any plan. An officer's title is set separately from admin access. The title is how they're listed on your home page and public page. #### Make each officer an admin 1. In the menu, click **Members**, then **Add Member**. 2. Fill in **First Name**, **Last Name**, and **Email**, and **Phone** if you have it. 3. Check **Make them an admin**. 4. Click **Add Member**. The officer appears in the list with **Admin** in the **Role** column, and GuildeHall sends them the setup email from task 1. Ask each officer to complete task 1. If the officer is already a member of your Guilde, don't add them again. Instead, find their row on the **Members** page, click **⋯** at the end of it, and choose **Make admin**, then confirm. Their **Role** changes to **Admin**. #### Give officers their titles 1. In the menu, click **Settings**. 2. In the **Leadership** card, under **Add someone**, start typing the officer's name in **Find a member by name**, and choose them from the list. 3. Type their title, such as Treasurer, or choose one of the suggestions, and click **Add**. 4. Repeat steps 2 and 3 for each officer. 5. Use the up and down arrows beside each name to put them in order, with the president first. The public page shows each officer's first name and last initial only, such as "President Margaret W." You can give a title to an officer who already had a GuildeHall account before they accept the invitation. The search marks them as invited, and their name appears on the public page at once. #### When an officer steps down On the **Members** page, click **⋯** on their row and choose **Remove admin role**, then confirm. They stay a member. Then, on **Settings**, click **Remove** beside their name in the **Leadership** card, and confirm. You can't remove your own admin role this way. "Hand the Guilde over to next year's officers," in Part 2, explains how to pass on your own role. ### 4. Set up dues **Takes:** about fifteen minutes, then anywhere from a few minutes to a day or two while Stripe reviews the Guilde's details. **Have ready:** Guilde Standard (see task 2), and the items listed under "What to have ready" below. The treasurer usually does this task, because whoever does it becomes the person responsible for the Guilde's Stripe account, and their email becomes the Stripe login used to see payouts and give refunds. If you aren't the treasurer, hand this task to them once they've completed task 1. Stripe is the payment company that handles the money. When a member pays dues online, the money goes from their card to the Guilde's own bank account. GuildeHall never handles it and takes none of it. #### What to have ready - The Guilde's legal name and mailing address, exactly as they appear on its tax records. - The Guilde's tax ID number, if it has one: its EIN (Employer Identification Number) or its nonprofit ID number. - Whether the Guilde is incorporated as a nonprofit or is an unincorporated association. If you aren't sure, ask the Guilde's president or check its founding papers before you start. - The routing number and account number of the Guilde's own bank account. Payouts go there, so don't use a personal account. - Your date of birth and the last four digits of your Social Security number. Stripe requires these from the person responsible for every US account. GuildeHall never sees them. - A mobile phone that can receive text messages. Appendix B is a printable version of this list with space to fill it in. #### Start in GuildeHall 1. In the menu, click **Dues**. 2. In the **Collecting dues online** card, click **Set up with Stripe →**. Stripe's website replaces the GuildeHall page. #### Finish on Stripe's website Stripe asks for the items on your list as you go. If you need to stop partway, close the tab. When you later go back to **Dues** in GuildeHall, the card says "Stripe needs a few more details," and **Finish Stripe setup →** takes you back to where you left off. 1. Enter your email address. It becomes your Stripe login. If you already have a Stripe login, use that email and sign in. 2. Stripe asks you to secure your login. If you set up an authenticator app in task 1, you can scan Stripe's QR code with it. Otherwise click **your phone**, in the small line under the **Next** button, to have Stripe text you codes instead. 3. For the type of business, choose the nonprofit option. If Stripe then asks how the Guilde is organized, choose incorporated or unincorporated to match what you noted under "What to have ready." 4. Enter the Guilde's legal name, address, and tax ID number if it has one, and your own details as the person responsible. 5. GuildeHall has already filled in the Guilde's public name, its website, and how its charges will appear on members' card statements. Check each one and correct anything that's wrong. 6. If Stripe asks about fraud protection, choose the free option. 7. If Stripe offers to help collect sales tax, click **Not right now**, since GuildeHall's dues checkout doesn't charge sales tax. Also skip Climate, an optional program that gives part of each payment to carbon removal, and any other extras Stripe offers. 8. Add the Guilde's bank account. Stripe may offer to connect it by signing in to the bank. You can do that, or choose to enter the routing and account numbers by hand. 9. Review the details and agree to Stripe's terms. Stripe sends you back to the **Dues** page, which says "Stripe is checking your Guilde's details." That usually takes a few minutes, and sometimes a day or two. If a Stripe screen doesn't match these steps, see "Getting help" in Part 3. #### Add your membership tiers while Stripe checks A tier is one kind of membership with its own price and length, such as Individual at $20 a year or Household at $35 a year. Members choose one when they pay. 1. On the **Dues** page, click **Add a tier**. 2. In **Name**, type the tier's name, such as Household. 3. In **Price**, type the price. Under it, the form shows how much the Guilde will receive after Stripe's fee, and what to charge to receive a round number, for example "To receive $40.00, charge $41.50." Change the price if you'd like the Guilde to receive the round number. 4. In **Length**, choose how long the membership lasts. 5. Under **Covers**, choose **Just one person**, **A household**, or **A business**. For a household or a business, enter how many people it covers in **Up to**. 6. Add a **Description** if you like. 7. Leave **Offer automatic renewal** checked if you want members to be able to renew automatically at the end of each term. Each member decides when they pay. Uncheck it to offer only one-time payments for this tier. 8. Click **Add tier**. 9. Repeat steps 1 to 8 for each tier. When Stripe has finished checking, the card at the top of the **Dues** page says **Dues are on.**, and **Membership** appears in every member's menu, where they can pay online. #### Record the checks and cash that still arrive Some members will keep paying by check or in cash. Record each payment so that GuildeHall shows who has paid. This works whether or not online dues are on. 1. On the **Dues** page, in the **Payments** card, click **Record a payment**. 2. In **Member**, search for the member's name and choose them. 3. In **Tier**, choose their membership. For a household or business tier, fill in the household or business name. 4. In **Paid by**, choose **Check**, **Cash**, **Other**, or **Complimentary** for a free membership. 5. Make sure the **Amount**, which starts at the tier's price, and the **Date paid**, which starts at today, are right. Add a note, such as the check number, if you like. 6. Leave **Email [first name] a receipt** checked to email the member a receipt, or uncheck it. 7. Click **Record payment**. A message says the member is now paid up through a date, and the payment appears in the **Payments** list. The receipt gives your Guilde's name, the tier, the amount, the date paid, and the dates the membership covers. You can also record a payment from the **Members** page by clicking **⋯** on the member's row and choosing **Record dues payment**. ### 5. Schedule your events **Takes:** about five minutes for each event. **Have ready:** the date, time, and place of your next meeting, and of anything else on the calendar. #### Create your regular meeting 1. In the menu, click **Events**, then **New event**. 2. Fill in **Title**, such as Monthly meeting, and choose an **Event type**, such as Meeting. 3. Set the **Start** and **End** date and time of the next meeting. 4. If the meeting repeats, choose how in **Repeats**, for example "Monthly on the 1st Tuesday." Then set **Until** to the last date you want on the calendar, up to two years ahead, or 100 dates, whichever comes first. 5. Fill in **Location**. If members can also join by video call, paste the link into **Video call link**. Only signed-in members see it. 6. Add a **Description** if you like. 7. If your Guilde is public, you can show the meeting on its public page as well as to members: check **Show on the public Guilde page**. For a repeating meeting, every date becomes public, and the public page lists the next one. Private and secret Guildes have no public page, so the box doesn't appear. 8. Leave **Email every member about this event** checked to send every member an email about it, or uncheck it to skip the email. Members see the new event in GuildeHall either way. While you're trying things out, uncheck it, so that a test event doesn't reach the whole Guilde. 9. Click **Create event**. The meeting now appears under **Events**. A repeating meeting is listed once, at its next date, with a line such as "Every month on the 1st Tuesday." Each date keeps its own list of who's coming. #### Change whether an event is on your public page 1. On **Events**, click the event to open it. 2. Under the title, check or uncheck **Show on the public Guilde page**. 3. If the event is one date of a repeating meeting, a window asks which dates to change. Click **This and all future dates**, or **Only this date**. An event on the public page shows a **Public** label above its title. The box appears only in a public Guilde. If your Guilde is public, its public events also appear in the events directory on guildehall.com. To keep them off the directory, go to **Settings**, and in the **GuildeHall Events** card uncheck **List our public events on GuildeHall Events**. Part 2 explains free tickets, checking people in at the door, and asking for volunteers. ### 6. Bring in your member list **Takes:** about fifteen minutes to import a spreadsheet, or a minute for each member you add by hand. **Have ready:** your member list in a spreadsheet, with at least each member's first name, last name, and email address. Also have the welcome letter from task 7 ready to send, because members get their setup emails the moment you bring them in. Each member needs their own email address. If two people in a household share one, GuildeHall accepts only the first. Add the second person later with an address of their own, or leave them off for now. #### Prepare the spreadsheet 1. In the menu, click **Members**. 2. Click **Import CSV**, then **Download CSV Template**. A spreadsheet file named import_template.csv downloads to your computer. 3. Open the template in Excel or Numbers by double-clicking it. In Google Sheets, choose **File**, then **Import**, then **Upload**, and choose the file. 4. Leave the first row exactly as it is. It holds the column headings: first_name, last_name, email, phone, address_line1, address_line2, city, state, zip_code, and date_of_birth. 5. Copy your members into the rows below, one member to a row, with each piece of information under its heading. If your list has each person's whole name in one column, split it into first and last names. Only first_name, last_name, and email are required, so leave any other column blank if you don't have it. Write dates of birth as year, month, and day, as in 1968-04-23. 6. Save the file in CSV format: - In Excel, choose **File**, then **Save As**, and pick **CSV UTF-8 (Comma delimited)** as the format. If Excel warns that some features will be lost, continue. That's expected. - In Google Sheets, choose **File**, then **Download**, then **Comma-separated values (.csv)**. - In Numbers, choose **File**, then **Export To**, then **CSV**. A file can hold up to 500 members. If your list is longer, split it into two files and import each one. On Guilde Free, the import stops when the Guilde reaches 150 members, counting the officers you've already added, and any rows past that are listed as skipped, with a note about upgrading. #### Import it 1. Back on the **Members** page, click **Import CSV**. 2. Under **CSV File**, choose the file you saved, and click **Upload & Import**. 3. Read the result. It says how many members were imported and how many were skipped, and it lists each skipped row with the reason, such as "Invalid email format." 4. If any rows were skipped, correct them in your spreadsheet, save it again, and repeat steps 1 to 3. Members already brought in are skipped with "Already a member of this Guilde," so nobody is added twice. 5. Click **Close**. Your members now appear in the list. Send the welcome letter in task 7 now. #### Add one member at a time 1. On the **Members** page, click **Add Member**. 2. Fill in **First Name**, **Last Name**, and **Email**, and **Phone** if you have it. 3. Leave **Send invite email to set up account** checked. 4. Click **Add Member**. A message confirms that the setup email has been sent. #### What members receive Each new member gets the setup email you received in task 1, titled "Set up your account - [your Guilde's name]," with a button to choose a password. Its link works for seven days. A member who already has a GuildeHall account gets an invitation to accept instead. #### See who hasn't set up an account On the **Members** page, the **Status** column shows **Not set up** for anyone who hasn't chosen a password yet, and **Invited** for anyone with an existing account who hasn't accepted the invitation, and **Inactive** for an account that has been turned off. Everyone else shows nothing there. The **Admin Dashboard** also tells you how many members haven't set up their accounts. Rows marked **Not set up** or **Invited** also show when the last email went out. If a member says it never arrived, or its link has expired, click **Resend** on their row, then confirm. A **Not set up** row shows **Send invite** instead if no setup email has gone out yet. If you mistyped someone's name or email address, "Correct a member's name or email address" in Part 2 explains how to fix it. ### 7. Send your welcome letter **Takes:** about twenty minutes. **Have ready:** the welcome letter in Appendix A, and the date and place of your next meeting. The welcome letter tells members that the Guilde has moved to GuildeHall and what to do next. Send it right after task 6, so that it arrives alongside their setup emails. These steps work on every plan. On Guilde Free, the letter goes to all of your members in GuildeHall's standard look. #### Write the letter 1. In the menu, click **Communications**, then **Write a letter**. 2. In **To**, choose **Members only**. On Guilde Free, **To** shows **All members**, its only choice. The line below shows how many members it will reach. Members who were invited with an existing account and haven't accepted yet aren't counted, and won't receive the letter. 3. In **Subject**, type the subject from Appendix A, with your Guilde's name filled in. 4. Copy the letter from Appendix A into the **Letter** box, starting with its first paragraph. GuildeHall adds a greeting with each member's first name, so leave out "Hi everyone" and the subject line. Fill in every blank in square brackets, and delete the sentence about dues if your Guilde doesn't take dues online. GuildeHall saves your draft a few seconds after you stop typing. On a wide screen, the right side shows the letter as members will see it. On a smaller screen, click or tap **Preview** to see it, and **Write** to go back. #### Send yourself a test 1. Click **Send test to me**. 2. Open the test in your own inbox, and check that every blank is filled in and the letter reads the way you want. #### Send it 1. Click **Send**. A window asks you to confirm and shows how many people the letter will reach. A letter can't be unsent. 2. Click **Send now**. GuildeHall opens the letter's own page. Its **Delivery** card counts the copies the mail service has accepted and, as they arrive, the copies delivered to members' inboxes. The counts update while the letter goes out. Reload the page later to see how many copies were delivered. ## Part 2: Running your Guilde Look these tasks up when you need them. They're grouped by the kind of work: members and the mailing list, dues, letters, events, documents and committees, the wall and the forum, your public page, your plan, and your own account. Where Part 1 already gives the steps, the task here points to them and adds what Part 1 leaves out. Every task in this part can be done by any admin. The last group, "Your own account," is for every member. ### Members and mailing list Everything in this group happens on pages under **Admin** in the menu. The **Members** page lists everyone in the Guilde, 20 at a time. Use **Previous** and **Next** at the bottom of the list to see the rest, or type a name in the search box to find someone at once. #### Add a new member **Takes:** about a minute. **Have ready:** the person's name and email address. Part 1, task 6, covers the steps under "Add one member at a time." A few more things to know: - Each person needs an email address of their own. The box takes only one person's address. - **Phone** takes a US number only. - Leave **Send invite email to set up account** checked unless you'd like to send the setup email later. If you uncheck it, the row shows **Send invite**, and you can send it from there whenever you're ready. - If the email address already has a GuildeHall account, for example because the person belongs to another Guilde, GuildeHall sends them an invitation to accept instead of a setup email, whether or not the box is checked. They show as **Invited** until they accept, and until then you see only their name and email address. - On Guilde Free, you can't add anyone once the Guilde has 150 members. The window shows **Upgrade required**, with a button to the plans on **Settings**. Members invited with an existing account don't count until they accept, and once the Guilde has 150 members they can't accept until it moves to Guilde Standard. #### Remove a member **Takes:** about a minute. **Have ready:** nothing. 1. On the **Members** page, click **⋯** at the end of the member's row. 2. Choose **Remove from Guilde**, and confirm. On a phone, tap the member's card to open it, then tap **Remove Member**. The member loses access to the Guilde at once. GuildeHall also takes them off the **Leadership** list and stops any automatic dues renewal, so they aren't charged again. The time they've already paid for runs to its end date. GuildeHall doesn't email them about the removal. Their account stays, because it may belong to other Guildes too, and so do their posts and their dues records. To bring them back, add them again with **Add Member**. If they had set up their account, they'll get an invitation to accept. If they never did, they're back in the Guilde at once and, if you leave **Send invite email** checked, get a new setup email, as when you first added them. GuildeHall won't remove the Guilde's only admin. Make someone else an admin first. If Stripe can't be reached to stop an automatic renewal, nothing is removed, and the message asks you to try again in a few minutes. A member can also leave the Guilde on their own, from **My Account**, as "Leave a Guilde" explains. The same rules apply, and the **Audit Log** records that they left. #### Resend an invitation **Takes:** about a minute. **Have ready:** nothing. Use this when someone says the email never arrived, or that its link has expired. 1. On the **Members** page, find the person's row. Its **Status** column says **Not set up** or **Invited**, with the date the last email went out. 2. Click **Resend**, or **Send invite** if no setup email has gone out yet, and confirm. On a phone, tap the person's card to open it, then tap **Resend Invite**, **Send Invite**, or **Resend Invitation**. A message confirms that the email has been sent. A **Not set up** row is someone you added who hasn't set up their account, and they get the setup email again. Its link works for seven days, and the link in an earlier email that hadn't yet expired works for those seven days too. An **Invited** row is someone who already had a GuildeHall account and hasn't accepted yet. They get the invitation again, titled "[your name] invited you to join [Guilde name]," with the same link as before. **Resend** waits two minutes between emails to the same person. A second click straight away says "An email went to them a moment ago." The **Admin Dashboard** also lists, under "Needs your attention," how many members haven't set up their accounts. #### Correct a member's name or email address **Takes:** about a minute. **Have ready:** the right spelling or address. This works only for a row marked **Not set up**: someone you added who hasn't signed in yet. Once a person has set up their account, an officer can't change their name or email address, because the account is theirs and may belong to other Guildes too. They can correct their own name under **My Account**. 1. On the **Members** page, click **⋯** at the end of the person's row. 2. Choose **Edit name and email**. 3. Correct the **First Name**, **Last Name**, or **Email**, and click **Save**. On a phone, open their card and tap **Edit Name and Email**. If you changed the email address, GuildeHall sends the setup email to the new address at once, and the link sent to the old address stops working. Nothing changes, and a message on the page says why, if the new address already belongs to another GuildeHall account, or if another Guilde also added this person. In either case remove the row and add the person again with the right address. #### Reset a member's password **Takes:** a minute. **Have ready:** nothing. For a member who has set up an account but forgotten the password. A member can also do this themselves, from the sign-in page. 1. On the **Members** page, click **⋯** at the end of the member's row. 2. Choose **Reset password**, and confirm. On a phone, open their card and tap **Trigger Password Reset**. GuildeHall emails the member a link to choose a new password, which works for one hour. #### Sort members into groups with tags **Takes:** about five minutes to set up, then a minute for each member. **Have ready:** nothing. A tag is a label you put on members, such as "Block captain" or "Garden committee." You can show only the members with a tag, and send a letter to everyone who carries one. Members don't see tags in the app, though a member's own data download lists the tags they carry. ##### Create a tag 1. On the **Members** page, click **Manage tags**. 2. Type the tag's name in **New tag name**, and click **Add**. 3. Repeat for each tag, then close the window with the × in its corner. In the same window, **Rename** changes a tag's name, and **Delete** removes it from every member after you confirm. A letter already sent to a tag keeps its record. ##### Give a member tags 1. On the **Members** page, click **⋯** on the member's row and choose **Edit tags**. 2. Check each tag that applies, and click **Save**. The member's tags now appear under their email address in the list. Tags are given one member at a time. ##### Show only the members with a tag Choose the tag in the dropdown beside the search box. It starts at **All tags**. The number beside each tag is how many people the list shows when you choose it, including those who haven't set up their accounts. #### Download the member list **Takes:** about a minute. **Have ready:** nothing. 1. On the **Members** page, click **Export CSV**. A file named members_export.csv downloads to your computer. 2. Open it in Excel or Numbers by double-clicking it. In Google Sheets, choose **File**, then **Import**, then **Upload**, and choose the file. The file always holds the whole Guilde, whatever the search box or tag dropdown shows: every member and officer, including those who haven't set up their accounts. People invited with an existing account who haven't accepted yet aren't in it. The columns are first_name, last_name, email, username, phone, address_line1, address_line2, city, state, zip_code, date_of_birth, role, membership_tier, membership_status, and gets_letters. The gets_letters column says yes or no: no means the member asked not to receive the Guilde's letters, or their address can't receive mail. Leave the no rows out whenever you email members from your own account. The file has no tags and no join dates. #### Keep a mailing list of people who aren't members **Takes:** about a minute for each address. **Have ready:** nothing. The **Contacts** page holds email addresses of people who want to hear from the Guilde without joining, such as neighbors or prospective members. A contact has no account, doesn't appear in the roster, and doesn't count toward the 150-member limit on Guilde Free. Storing contacts is free on every plan, but only Guilde Standard sends them letters. On Guilde Free, letters go to members only. ##### Add a contact 1. In the menu, click **Contacts**, then **Add contact**. 2. Fill in **Email**, and **Name** and **Note** if you like. 3. Click **Add contact**. The contact is added as **Subscribed**. GuildeHall doesn't email them when you add them. GuildeHall refuses an address that unsubscribed from the Guilde's mailings, with a message saying that only the person can sign up again. An officer can't override it. ##### Change or remove a contact Click the contact's row to open it. You can change the **Name** and **Note** and click **Save**. To change an email address, remove the contact and add it again. **Remove** deletes the contact after you confirm. Removing a contact who unsubscribed also deletes the record of their choice. If the address is later imported again, they would start receiving mail. Keep unsubscribed contacts on the list. ##### What the statuses mean - **Subscribed** contacts receive letters sent to contacts. - **Pending confirm** contacts signed up on your public page and haven't clicked the link in their confirmation email yet. They receive nothing until they do, and an officer can't confirm for them. - **Unsubscribed** contacts are never emailed. Only they can sign up again, through the form on your public page. The dropdown that starts at **All contacts** narrows the list to **Subscribed**, **Unsubscribed**, or **Pending**, and the search box finds a contact by email address or name. ##### How people sign themselves up A public Guilde's page has a **Get updates by email** card. A visitor enters their email address, and their name if they like, and clicks **Subscribe**. GuildeHall emails them a confirmation link, and they're added as **Pending confirm** until they confirm. Private and secret Guildes don't have this form, and neither does a Guilde on Guilde Free, whose letters don't reach contacts. Every letter to a contact carries an unsubscribe link at its foot. A contact who uses it shows as **Unsubscribed**. ##### Download the contacts Click **Export** on the **Contacts** page. A file named contacts_export.csv downloads, with every contact and their status. #### Move your mailing list over from Mailchimp **Takes:** about twenty minutes. **Have ready:** your Mailchimp login. Mailchimp exports a separate file for each kind of contact. Import the subscribed contacts as subscribers, and the unsubscribed and cleaned contacts as an unsubscribe list, so that nobody who left your old list, and no address that bounced, starts receiving mail again. 1. In Mailchimp, click **Audience**. If you have more than one audience, choose the one to move from the **Audience** menu. 2. Click **Export audience**, then **Export CSV**. Mailchimp emails you when the export is ready. 3. Download the export. It's a ZIP file holding a CSV file for each kind of contact, with the kind in the file's name: subscribed, unsubscribed, non-subscribed, and cleaned. Open it to unpack the files. An audience with only one kind of contact exports as a single CSV file. 4. In GuildeHall, on the **Contacts** page, click **Import CSV**. 5. Under **What is this file?**, leave **Subscribers — people who want your mailings** chosen. Under **CSV File**, choose the subscribed file, and click **Upload & Import**. 6. Read the result. It says how many were imported and how many were already on the list, and it lists any rows it rejected, with the reason. 7. Click **Import CSV** again. This time choose **An unsubscribe list (from Mailchimp or another service)**, choose the unsubscribed file, and click **Upload & Import**. Do the same with the cleaned file, which holds addresses Mailchimp stopped sending to because mail to them bounced. 8. Close the window. Leave out the non-subscribed file. It holds people who never signed up for mail, such as buyers from an online store. Mailchimp's column names work as they are. A file can hold up to 2,000 rows. If yours is longer, split it and import each part. Contacts imported as subscribers are added as **Subscribed**, without a confirmation email. The **Switching from Mailchimp?** panel at the bottom of the **Contacts** page repeats these steps. Click **Show** to open it. ##### Put a signup form on your own website The same panel holds a ready-made signup form for your Guilde's own website. Open the panel with **Show**, click **Copy form HTML**, and give the copied text to whoever manages the website, to paste into a page. People who sign up through it get the same confirmation email as on your public page. The form works only while your Guilde is on Guilde Standard or Premium. On Guilde Free, people who use it see a "page not found" message. If the **Guilde Details** card on **Settings** has a **Website**, the form sends people back to that website after they sign up. A form copied before the website was added doesn't do this, so copy the form again after adding it. Whoever manages the website can change the address after `return` in the form to the page the form is on, as long as it's on the same site. Without a website on file, people land on your Guilde's public page on GuildeHall, which tells them to check their email. The form works only while the Guilde is public. The panel warns you if it isn't. #### Answer people who write through your public page **Takes:** a few minutes for each message. **Have ready:** nothing. A public Guilde's page has a **Get in touch** form, and a private Guilde's page has a **Request to join** form. When someone sends one, every admin who has set up their account gets an email titled "New inquiry from [name] — [Guilde name]," and the **Admin Dashboard** lists it under "Needs your attention." A dot appears beside **Admin Dashboard** in the menu while one is waiting. 1. On the **Admin Dashboard**, click the line about new messages from your public page, or **All inquiries** at the bottom of the "Needs your attention" card. The **Inquiries** page opens, showing open messages. 2. Read the message, and decide whether to answer it or to bring the person into the Guilde. 3. To answer, click **Reply by email**. Your own email program opens a reply addressed to the sender. Then record what you did: click **⋯** and choose **Mark as contacted**, **Mark as joined (no invite sent)**, or **Dismiss**. 4. To bring the person into the Guilde, click **Add as member**, and confirm. GuildeHall adds them, emails them a setup link, or an invitation if they already have an account, and marks the message **Joined**. Replying doesn't change the message's status on its own, so mark it yourself, or the next officer may answer it again. **Add as member** takes the first word of the name they typed as the first name and the rest as the last name. If they typed only one name, their last name reads "(from inquiry)." Ask them to correct it on their **My Account** page once they've signed in. The chips at the top of the page show **All**, **Open**, **New**, **Contacted**, **Joined**, or **Dismissed** messages. **Reopen**, under **⋯**, brings back one that was marked joined or dismissed. Each list shows the 50 most recent messages. #### Let people join with a link **Takes:** about five minutes. **Have ready:** nothing. An invite link lets anyone who has it join the Guilde without an officer adding them. Hand it out at a meeting or print it in a newsletter. For a private Guilde, the link is the approval, so share it only with people you'd approve. For a secret Guilde, the person also confirms who they are with a code before joining. ##### Make a link 1. In the menu, click **Settings**. In the **Invite Links** card, click **Create invite link**. 2. If you like, type a **Label** so you'll know the link later, such as "October newsletter." 3. If the link should stop working on a date, set **Expires**. If it should stop after a number of people have used it, set **Max uses**. Leave both blank for a link that works until you revoke it. 4. Leave **Role on join** as **Member**. **Admin** makes everyone who uses the link an admin, so choose it only for a link you send to officers. 5. Click **Create link**. 6. Click **Copy URL** beside the new link, and paste it wherever you're sharing it. Each link shows how many times it has been used. To stop a link, click **Revoke** and confirm. A revoked link can't be turned back on, so make a new one if you need it again. ##### What the person sees The link opens a page naming the Guilde and who invited them. If they aren't signed in, they click **Sign in to accept**, or **Create one** to make an account. Then they click **Accept and join [Guilde name]**, and they're a member at once. For a secret Guilde, they also enter a six-digit code before joining, either from their authenticator app or from an email GuildeHall sends them. GuildeHall doesn't notify admins when someone joins by link. They appear on the **Members** page. On Guilde Free, a link stops working for new people once the Guilde has 150 members. A person who joined through a link and was later removed can't use the same link again. Send them a new one, or add them on the **Members** page. #### Hand the Guilde over to next year's officers **Takes:** about half an hour, with the incoming officers. **Have ready:** each incoming officer's name and email address, and whoever holds the Guilde's Stripe login. 1. Make the incoming officers admins. Follow "Make each officer an admin" in Part 1, task 3. Do this first, so the Guilde always has an admin. 2. Take the outgoing officers off the Leadership list. On **Settings**, in the **Leadership** card, click **Remove** beside each one, and confirm. 3. Add the incoming officers. In the same card, under **Add someone**, add each one with their title, as in Part 1, task 3. Use the arrows to put the list in order. **Change title** only rewords a title. 4. Remove the outgoing officers' admin access. On the **Members** page, click **⋯** on each outgoing officer's row, choose **Remove admin role**, and confirm. They stay members. 5. Hand over the Stripe account, as described in the next section, if the Guilde takes dues online. 6. Step down yourself. On **Settings**, in the **Danger Zone** card at the bottom, click **Step down as admin**, and confirm. You stay a member, and GuildeHall takes you to the home page. **Step down as admin** appears only when the Guilde has another admin, so the Guilde is never left without one. Stepping down doesn't take you off the Leadership list, so include yourself in step 2. ##### Hand over the Stripe account GuildeHall doesn't control who can sign in to the Guilde's Stripe account. The person who set it up in Part 1, task 4, is its owner, and only the owner can hand it to someone else. Stripe calls the people with logins its team. 1. The owner signs in to the Stripe Dashboard and goes to dashboard.stripe.com/settings/team. 2. The owner clicks **Add member**, types the incoming treasurer's email address, chooses the **Super Administrator** role, and clicks **Send invites**. 3. The incoming treasurer opens Stripe's invitation email and accepts it within 10 days, creating a Stripe login if they don't have one. 4. On the same **Team** page, the owner clicks **⋯** beside the incoming treasurer, chooses **Transfer ownership**, and follows Stripe's prompts. 5. The new owner then removes the outgoing treasurer from the **Team** page, or keeps them on if the Guilde wants that. To give another officer a login without making them the owner, follow steps 1 and 2 and choose the **Administrator** role. An Administrator can refund payments and see payouts, but can't change the owner or the bank account. If the owner can't be reached, the Guilde can't hand the account over itself. Write to Stripe Support, at support.stripe.com. A Guilde's plan, if it pays for one, is billed to a card on file. To change the card, an admin clicks **Manage billing** in the **Guilde Plan** card on **Settings**. See "Change your billing or card." The **Danger Zone** also holds **Delete Guilde**, which deletes the Guilde and everything in it, so read the button before you click. ### Dues and money Most of this work happens on the **Dues** page, under **Admin** in the menu. GuildeHall has no separate treasurer role, so the treasurer needs to be an admin (Part 1, task 3). The **Dues** page has up to five cards, from top to bottom: **Collecting dues online**, **Where things stand**, **Payments**, **Membership tiers**, and, once members can pay online, **Join link**. On Guilde Free, everything here works except collecting dues online. You can add tiers, record checks and cash, download payments, and see who has paid. #### Record a check or cash payment **Takes:** about a minute for each payment. **Have ready:** who paid, how much, and on what date, and the check number if there is one. The steps are in Part 1, task 4, under "Record the checks and cash that still arrive." A few more things to know: - The **Date paid** can be any past date, but not a future one. - A payment made early isn't lost. If the member is still paid up, the new term starts when the current one ends. - For a household or business tier, the member who paid adds the other people it covers, from their own **Membership** page. Officers can't add them. "What members see when they pay," below, explains how. - The **Members** page doesn't offer **Record dues payment** on a phone, or on rows marked **Invited**. Use the **Dues** page instead, where you can find anyone by name. - **Email [first name] a receipt** starts out checked. The receipt is titled "Receipt for your dues - [Guilde name]." If the **Public email** on **Settings** is filled in, a reply to it goes there. For a complimentary membership it's titled "Your membership - [Guilde name]" and shows no amount or date paid. The note you typed isn't included. GuildeHall sends the receipt even to a member who has turned off letters, since it's a record of their own payment. If it can't be sent, a second message says so, and the payment is still recorded. Correcting or deleting a payment sends nothing. - GuildeHall sends reminders before the membership ends, to members who paid by check or cash as well as online. ##### Correct a payment you recorded 1. On the **Dues** page, in the **Payments** card, find the payment and click **Correct** beside it. 2. Change **Paid by**, **Amount**, or **Note**, and click **Save**. To fix the member, the tier, or the date, click **Delete payment** in the same window and confirm, then record the payment again. Deleting a payment also takes back the membership time it added. Only payments recorded by hand have **Correct**. Online payments are changed in Stripe, as "Give a refund" explains. #### See who has paid and whose membership has lapsed **Takes:** a minute or two. **Have ready:** nothing. Lapsed dues never lock anyone out. A member whose dues have lapsed signs in, posts, and appears in the roster as before. Lapsing changes only how they're labeled and which letters they can be sent. On the **Dues** page, the **Where things stand** card shows four figures: - **Paid up**: members whose membership hasn't ended, including people covered by someone else's household or business membership. Officers count as members. - **Renewing automatically**: members whose membership will renew and be charged on its end date. - **Ending in the next 60 days**, which includes members who will renew automatically. - **Lapsed**: members who have paid before and whose membership has ended. The line below the figures gives the dues collected since January 1, before Stripe's fee. Click any of the four figures to open the **Members** page showing the people it counts. On the **Members** page itself, the dues list beside the search box does the same: choose **Paid up**, **Renewing automatically**, **Ending in 60 days**, **Lapsed**, or **No dues on record**, and choose **All dues** to see everyone again. The list appears once your Guilde takes dues, and counts the same people as the figures, so members who haven't accepted an invitation are left out. Once your Guilde takes dues, the member list also has a **Tier** column, which shows one of these for each member: - The tier and "Through [date]," for a member who is paid up. - "Ends [date]," for a membership ending within 60 days. - "Renews [date]," for a membership that will renew automatically. - "With [household name]," for someone covered by another member's household or business membership. - "Lapsed [date]," for a membership that has ended. - "None," for someone who has never paid. Clicking the **Tier** heading sorts the list by it, but only the 20 members on the page you're looking at. To write to everyone whose dues are ending or have lapsed, send them a letter, as described in "Send a letter to part of the Guilde." On a phone, the member list shows the tier only for members who are paid up, without dates. Every member can see the **Roster**, and once your Guilde takes dues, the roster shows each member's tier. Members who aren't paid up, and members covered by a household, show a dash there. #### Change a tier's price **Takes:** about two minutes. **Have ready:** nothing. 1. On the **Dues** page, in the **Membership tiers** card, click **Edit** beside the tier. 2. Change the **Price**. 3. Click **Save**. The message that appears says how many members on automatic renewal will pay the new price at their next renewal. Everyone else pays the new price the next time they pay. Changing the **Length** applies to payments from then on. Members already on automatic renewal keep the length and price they signed up for, so nobody is charged more often than they agreed to, and the message says how many. A member who wants the new length can stop automatic renewal on their **Membership** page and, once their term ends, pay again with automatic renewal on. GuildeHall doesn't email members about a price change, though the reminder it sends 30 days before an automatic renewal quotes the amount that will be charged. Tell members yourself, in a letter, before the change takes effect. If you rename a tier, the **Roster** shows its members under the new name, and its tier filter finds them. Their payment records, and the **Dues** and **Members** pages, keep the old name until they pay again. ##### Stop offering a tier 1. Click **Edit** beside the tier. 2. Click **Remove tier**, and confirm. If anyone has ever paid for the tier, or started to, GuildeHall retires it instead of deleting it. It stays in the list marked **Not offered**, past payments keep its name, and members can no longer choose it. To offer it again, click **Edit**, check **Offer this tier to members**, and click **Save**. Members already renewing automatically on a retired tier keep renewing on it. To stop one, ask the member to click **Stop renewing automatically** on their **Membership** page, or cancel the renewal yourself in the Stripe Dashboard, as "Stop a member's automatic renewal" under "Give a refund" explains. #### Give a refund **Takes:** about five minutes. **Have ready:** for an online payment, the Guilde's Stripe login. If you don't have it, hand this task to whoever does, usually the treasurer. GuildeHall has no refund button. ##### A check or cash payment Return the money by hand. Then delete the payment in GuildeHall, as "Correct a payment you recorded" explains, so the member no longer shows as paid for that time. ##### An online payment Online payments are refunded in the Stripe Dashboard, which only someone with a login to the Guilde's Stripe account can open. 1. On the **Dues** page, in the **Collecting dues online** card, click **Open your Stripe Dashboard ↗**. Stripe opens in a new tab. 2. Sign in with the Guilde's Stripe login. 3. In the sidebar on the left, click **Transactions** to see the list of payments. The **Payments** menu holds other things and doesn't list them. 4. Find the payment, click **⋯** at the right of its row, and choose **Refund payment**. 5. Leave the amount as it is for a full refund, or type a smaller amount for a partial one. 6. Choose a reason. If you choose **Other**, Stripe asks for a note explaining it. 7. Click **Refund**. Stripe keeps its own fee on a refunded payment, so refunding a $1 payment costs the Guilde about 33¢. If the Guilde has no balance in Stripe at the time, the balance can dip slightly below zero. When Stripe reports the refund, GuildeHall marks the payment **Refunded**, in the **Payments** list and on the member's own **Membership** page. A full refund also takes back the membership time the payment bought and drops it from the year's total. A partial refund leaves the membership as it was. A full refund also turns off the member's automatic renewal, so they aren't charged again. After a partial refund, automatic renewal stays on. To stop it, ask the member to click **Stop renewing automatically** on their **Membership** page, or do it yourself in Stripe. ##### Stop a member's automatic renewal 1. In the Stripe Dashboard, type the member's email address in the search box at the top, and open their subscription. 2. Click **⋯**, and choose **Cancel subscription**. 3. Choose to end it at the end of the current period, and to give no refund. 4. Click **Cancel subscription**. The member's membership runs to its end date and doesn't renew, and GuildeHall shows it that way shortly after. Ending it immediately instead stops the renewal too, but doesn't shorten the time already paid for in GuildeHall. GuildeHall doesn't email the member about a refund. ##### If a member disputes a payment A member can ask their bank to reverse a card payment. When that happens, every admin who has set up their account gets an email titled "A dues payment was disputed - [Guilde name]," and the payment shows **Disputed** in the **Payments** list. Stripe holds the amount while the bank decides. The email's **Open the Stripe Dashboard** button takes you to where you can respond. The **Disputed** label stays in GuildeHall whatever the bank decides. #### Find payouts and payments in Stripe **Takes:** a few minutes. **Have ready:** the Guilde's Stripe login. Stripe keeps the full record of online payments: each payment, Stripe's fee, each refund, and each payout to the Guilde's bank account. GuildeHall records who paid, how much, and for which membership, but not fees or payouts. 1. On the **Dues** page, in the **Collecting dues online** card, click **Open your Stripe Dashboard ↗**. The button appears once dues are on. 2. Sign in with the Stripe login created during setup in Part 1, task 4. 3. Click **Transactions** in the sidebar on the left for the list of payments. The **Payments** menu holds other things, such as disputes, and doesn't list them. 4. For payouts, click **Balances** in the sidebar, then **Payouts**. Click a payout to see the payments, refunds, and fees it included. Each officer who needs Stripe should have their own login, not a shared one. "Hand over the Stripe account," under "Hand the Guilde over to next year's officers," explains how the owner adds one. The first time you open the Dashboard, Stripe asks you to verify your email address and shows a "Get started" panel meant for software developers. Verify the email and ignore the panel. #### Download payments for the treasurer or accountant **Takes:** about a minute. **Have ready:** nothing. 1. On the **Dues** page, in the **Payments** card, click **Export CSV**. A file named dues_payments.csv downloads to your computer. 2. Open it in Excel or Numbers by double-clicking it. In Google Sheets, choose **File**, then **Import**, then **Upload**, and choose the file. The file lists every payment the Guilde has ever received through GuildeHall, online and recorded, oldest first. It always includes all of them, whatever the list on the page is set to show. For one year's payments, sort by the date column and delete the rows outside that year. The columns are date, member, email, tier, amount, method, status, term_start, term_end, recorded_by, and note. Amounts are before Stripe's fee. A payment marked refunded may have been refunded only in part. A card payment made late in the evening may show the next day's date. Stripe's fees and payouts aren't in this file, and come from the Stripe Dashboard. #### What members see when they pay Members pay from **Membership** in their menu. It appears once the Guilde offers at least one tier and either takes dues online or has recorded a payment. The page opens with where the member stands, for example "You're a **Household** member through Jun 30, 2027." Below that, the member: 1. Chooses a tier. 2. For a household or business tier, types the **Household name** or **Business name**. 3. Leaves **Renew automatically every [length]** checked, or unchecks it. It starts out checked, so a member who doesn't want automatic renewal has to uncheck it. The box appears only for tiers that offer automatic renewal. 4. Clicks **Pay $[price] →** and pays on Stripe's secure page. A member who is still paid up and keeps automatic renewal checked sees **Turn on automatic renewal →** instead of a price, and pays nothing until their current membership ends. Back on the **Membership** page, a message says "Thank you. Stripe is confirming your payment," and a moment later "Thank you. Your dues are paid." GuildeHall emails a thank-you titled "Thank you for your dues - [Guilde name]." A member who pays early has the new term added to the end of the current one. A payment from a bank account takes several days to clear and appears only then. A member on automatic renewal sees two more buttons. **Stop renewing automatically** lets the membership run to its end date without renewing. **Update card ↗** opens a Stripe page where they can change the card on file. For a household or business tier, the member who paid sees a card listing the people it covers. They add each person with **First name**, **Last name**, and **Email**, and click **Add a person**. The person who paid counts toward the tier's limit. Each person added gets a setup email, or an invitation if they already have a GuildeHall account. If the Guilde doesn't take dues online, the page lists the tiers and says "[Guilde name] isn't taking dues online yet. Pay your treasurer by cash or check, and they'll record it." ##### Reminders GuildeHall emails each member before their membership ends, whether they paid online, by check, or in cash: - 30 days before: "Time to renew - [Guilde name]." - 7 days before: "Your membership ends soon - [Guilde name]." - For a membership that renews automatically, one email 30 days before: "Your membership renews on [date] - [Guilde name]," with the amount to be charged. If your Guilde takes dues online, the first two emails have a **Renew your membership** button and also mention paying the treasurer by cash or check. If it doesn't, they ask the member to pay the treasurer by cash or check. If an automatic renewal or a bank payment fails, the member gets "Dues payment didn't go through - [Guilde name]." ##### People who aren't members yet A public Guilde that takes dues online also lets new people join and pay in one step. Its public page shows a **Become a member** card and a **Join** button. The visitor chooses a membership, enters their name and email, clicks **Continue to payment →**, and pays. GuildeHall then emails them a link to set up their account. A new person becomes a member as soon as they've paid, with no approval step. Someone who already has a GuildeHall account gets an invitation instead, and becomes a member once they accept it. The **Join link** card on the **Dues** page gives the address of that form, with a **Copy** button, so you can share it or put it in a letter as a button. A private or secret Guilde doesn't have this form: new people join by invitation, then pay from their **Membership** page. ### Letters and messages A letter is an email from your Guilde to its members, its mailing-list contacts, or both. It's what a newsletter service such as Mailchimp sends. Letters are written on the **Communications** page, under **Admin** in the menu. Every plan sends letters. On Guilde Free, a letter goes to all of your members in GuildeHall's standard look, and ends with a line saying it was sent with GuildeHall Network. Guilde Standard adds your mailing list, letters to part of the Guilde, photos and a header image, your own masthead and color, scheduling, and showing letters on your public page. On Guilde Free, the editor explains this at the top. Each calendar month, Guilde Free can send up to 1,000 letter emails, Guilde Standard up to 10,000, and Guilde Premium up to 30,000. A letter to 400 people counts as 400. Test letters don't count, and the count starts again on the 1st. Under the **To** box, the editor shows how many your Guilde has used this month, and it warns you before you send a letter that would go past the limit. Such a letter isn't sent. A Guilde of 500 members sending a letter every week uses about 2,200 a month, so few Guildes come near the limit. If yours needs more, see "Getting help" in Part 3. The **Communications** page shows your four most recent letters. **All letters →** opens the full list, where each letter shows its status: **Draft**, **Scheduled**, **Sending**, or **Sent**. Click a letter to open it. #### Write and send a letter **Takes:** about half an hour for a newsletter, or five minutes for a short notice. **Have ready:** nothing. Part 1, task 7, covers a plain letter. This task covers everything else the editor does. ##### Write it 1. On **Communications**, click **Write a letter**. 2. In **To**, choose who receives it. "Send a letter to part of the Guilde," below, explains each choice. The line under the box shows how many people it will reach. 3. Type a **Subject**. 4. Write the letter in the **Letter** box. GuildeHall saves the draft a few seconds after you stop typing, and the time of the last save appears beside **Discard draft** at the bottom. **Save draft** saves it at once. On a wide screen, the right side shows the letter as it will arrive. On a smaller screen, use the **Write** and **Preview** tabs. ##### Format it The buttons above the **Letter** box format the text. Point to any button to see its name. - **Bold** and **Italic**: select words first, then click the button. Click it again to remove the formatting. - **Section heading** and **Sub-heading**: click in a line, then click the button to make that line a heading. - **Bulleted list** and **Numbered list**: click in a line, or select several, and click the button. - **Quote**: sets a passage off with a line beside it, for a quotation or a message from the president. - **Divider**: draws a line across the letter between sections. Clicking a heading, list, or quote button a second time turns the line back into ordinary text. ##### Add a link or a button 1. Select the words readers should click, and click **Link**. 2. Make sure **Link text** shows the words you want, type or paste the **Web address**, and click **Add link**. To change a link, click in it and click **Change link**. Change the address and click **Save**, or click **Remove link**. A button is a link drawn as a large colored button on a line of its own, for the one thing you most want readers to do, such as "Get tickets" or "Pay your dues." Click **Button**, fill in **Button text** and **Web address**, and click **Add button**. To change or remove it later, click the button in the letter. ##### Add photos Photos and header images are part of Guilde Standard. On Guilde Free, the **Photo** button and **+ Header image** don't appear. 1. Click in the line the photo should follow, and click **Photo**. 2. Choose the picture on your computer. It must be a JPEG, PNG, or WebP file of 10MB or less. If a photo is refused, it may be in the HEIC format iPhones use. Save a copy as JPEG and choose that instead. 3. Under the photo, type a caption in **Add a caption (optional)** if you like. 4. Choose its width: **Full**, **⅔**, or **½**. Narrower photos are centered. A letter holds up to 12 photos. **Remove photo** takes a photo out of the letter, but it still counts toward the 12, so that a letter already sent never loses a picture it showed. A letter where you've tried many photos may reach the limit early. The line beside **Photo** counts the uploads used. If you reach 12, start a new letter and copy the text across from the old one. ##### Add a header image Click **+ Header image** to put a picture across the top of the letter, above the greeting, such as the Guilde's name or a photo of the neighborhood. **Replace header image** and **Remove image** change it. If your Guilde has a standing masthead (see "Give your letters a masthead and a color"), every new letter starts with it. ##### Include posts and events Click **+ Posts** or **+ Events** to add recent wall posts or upcoming events. They appear after the letter under "From our notice board" and "Coming up," each with a link to read more. Check up to 10 of each, and click **Done**. In a public Guilde, only posts and events shown on the public page can be added, because a letter can go to people who aren't members. A private or secret Guilde has no public page, so any of its posts and events can be added. Events that have ended by the time the letter goes out are left out. ##### Check it and send it The editor warns you if the Guilde has no mailing address. The law on bulk email requires one at the foot of every letter, so add it under **Settings**, in **Guilde Details**. It also warns you past 35,000 characters, because mail programs cut off very long letters. When the letter is ready, send yourself a test first (see the next task). Then: 1. Click **Send**. A window shows who the letter is going to and how many people that is. 2. Click **Send now**. GuildeHall opens the letter's own page, which shows **Sending** and then **Sent**. A sent letter can't be recalled, changed, or deleted. ##### What readers receive The letter comes from your Guilde's name. Replies go to the **Public email** on **Settings**, so if that's blank, readers can't reply. Members' copies open with "Hi" and their first name. At the foot are the Guilde's address, links to its website and Facebook page if they're filled in, and three links: **Unsubscribe**, **Email preferences** (members only), and **View in browser**. ##### Discard a draft Click **Discard draft** at the bottom of the editor, then **Discard draft** again to confirm. Before a new letter is first saved, the button reads **Cancel** and leaves without keeping anything. A scheduled letter has no **Discard draft** button. Click **Unschedule** first. #### Send yourself a test first **Takes:** a few minutes. **Have ready:** nothing. 1. In the letter editor, click **Send test to me**. 2. Open the email in your own inbox. Its subject begins "[Test]." 3. Check the greeting, every link, the photos, and the address at the foot, and correct anything in the editor. The test goes only to your own email address. It's exactly what a member receives, with two things to know about: - **Unsubscribe** in a test changes nothing. It opens a page saying this was a test letter. In the letter members receive, the same link takes the reader off your Guilde's letters. - **View in browser** in a test says the letter wasn't found. It works once the letter has been sent. #### Schedule a letter for later **Takes:** a minute. **Have ready:** nothing. Scheduling is part of Guilde Standard. On Guilde Free, **Schedule…** doesn't appear. 1. In the letter editor, click **Schedule…**. 2. In **Send at**, choose the date and time, in your computer's time zone. 3. Click **Schedule**. The top of the editor then shows **Scheduled** with the time it will go. You can keep editing until then, and your changes are saved. The letter goes out within a minute of the time you chose. GuildeHall works out who receives it at that moment, so members who join or unsubscribe in the meantime are counted correctly. To change the time, click **Unschedule** at the top of the editor, then **Schedule…** again. To send a scheduled letter at once, click **Send now**, then **Send now** again in the window. If the letter can't go out at its time, for example because nobody is left to receive it, the tag it was addressed to was deleted, it would go past the Guilde's monthly limit, or the Guilde is no longer on Guilde Standard, it goes back to being a draft, and the officer who wrote it gets a notice under the bell explaining why. #### Send a letter to part of the Guilde **Takes:** a minute, once any tags you need exist. **Have ready:** nothing. These choices are part of Guilde Standard. On Guilde Free, **To** offers only **All members**. In the letter editor, choose the readers in **To**: - **Everyone — members and contacts**: every member, plus everyone on the mailing list. - **Members only**. - **Contacts only**: everyone on the mailing list who isn't a member. - **Members with a tag…**: then choose the tag in the box that appears. "Sort members into groups with tags" explains tags. - **Members with dues expiring soon (60 days)**: members whose membership ends in the next 60 days and won't renew automatically. - **Members with lapsed dues**: members who have paid before and whose membership has ended. - **People attending an event…**: then choose the event. It reaches members who said they're going or took a ticket. Guests who took tickets without an account aren't included. The line under **To** shows how many members and contacts the letter will reach, and how many it leaves out because they opted out of letters or their address can't receive mail. Every member who has opted out is left out, whatever you choose. To write to an event's attendees from the event itself, open the event and click **Email attendees**. The button appears only on Guilde Standard and Premium. A new letter opens with the event already chosen. #### Give your letters a masthead and a color **Takes:** about ten minutes. **Have ready:** an image for the top of your letters, if you have one: the Guilde's name or seal, or a photo, about 1200 pixels wide and 400 tall. These settings are part of Guilde Standard. They're on **Communications**, in the **Letter identity** card, which on Guilde Free shows a note in their place. They apply only to your Guilde's letters. Sign-in and password emails use GuildeHall's own look. ##### Add a masthead 1. In **Standing masthead**, click **+ Add a masthead**. 2. Choose the image. It must be a JPEG, PNG, or WebP file of 10MB or less. A message says new letters will carry it. Each new letter starts with the masthead as its header image, which you can change for that one letter. Letters already written, sent or not, keep the header they had. **Replace masthead** and **Remove** change it for future letters. ##### Choose a color 1. In **Letter color**, click one of the six colors, or type a color code such as #1F5C3D. 2. Click **Save color**. The color is used for headings, links, and buttons. GuildeHall refuses a color too light to read on white. If your Guilde takes dues online, its payment page uses the same color. The links to your website and Facebook page at the foot of every letter come from **Settings**, in **Guilde Details**. #### Start this month's letter from last month's **Takes:** a minute. **Have ready:** nothing. Only a letter that has gone out, or is going out, has **Duplicate**. A draft doesn't. 1. On **Communications**, click **All letters →**, and open last month's letter. 2. Click **Duplicate**, at the top right. A message says "Copied to a new draft," and the copy opens in the editor. It keeps the subject, the text, the readers, the photos still in the letter, the header image, and the posts and events. Photos removed from the original don't come across, so only the photos still in the letter count toward the copy's 12. Change the subject, which is copied exactly, and everything that's out of date. The copy and the original are separate from then on. #### See who your letter reached **Takes:** a minute. **Have ready:** nothing. Open the letter from **Communications** or **All letters →**. The **Delivery** card shows: - **Recipients**: how many people it was sent to. - **Accepted**: copies GuildeHall handed to its email service to deliver. - **Delivered**: copies that reached the reader's email provider, such as Gmail. - **Bounced** and **Failed**: copies that didn't arrive. - **Unsubscribed**: members who used this letter's **Unsubscribe** link. - **Opted out (skipped)** and **Undeliverable (skipped)**: people left out before sending, because they'd opted out of letters, or their address had bounced or been reported as spam before. The figures update while the letter is sending. Deliveries can keep arriving for some time after it reads **Sent**, so reload the page later for the final count. GuildeHall doesn't record who opens a letter or clicks its links, so there's no count of who read it. Click **Show delivery problems** to see the addresses that bounced or failed. An address that bounces permanently, because it doesn't exist, is marked **Undeliverable** on the **Members** or **Contacts** page, and future letters skip it. To see every address the letter went to, click **Show all [number] recipients** in the **Recipients** card. Each address shows whether it belonged to a member or a contact, and its status: **Delivered**, **Sent** (handed over, with no report from the reader's provider yet), **Bounced**, **Failed**, **Reported as spam**, or **Not sent yet** while the letter is still going out. Type part of an address in the search box to find it, or narrow the list by status, or to members or contacts only. The list shows 50 addresses at a time, with page numbers below. **View in browser ↗** opens the letter as a web page, and **The letter as sent** card shows it as readers received it. #### Put a letter on your public page **Takes:** a minute. **Have ready:** nothing. A public Guilde can show its letters on its public page, as an archive anyone can read. 1. Open a sent letter. 2. In the **Delivery** card, check **Show on our public page**. The letter now appears under "Recent letters" on your public page, which lists the five most recent you've chosen. Search engines can find it too. The public copy leaves out the greeting and the unsubscribe links. Uncheck the box to take it down. The box is off for every letter until you check it. It's part of Guilde Standard, and private and secret Guildes can't use it. #### Post a notice members see when they sign in **Takes:** a few minutes. **Have ready:** nothing. A mass message reaches members inside GuildeHall, in **Messages** and under the bell, with no email. Use it for a notice members will see the next time they sign in, such as a change of room. For anything that must reach people today, send a letter instead, with only a subject and a sentence or two. 1. On **Communications**, find the **Mass Message** card. 2. In **Send to**, leave **Everyone with an account**, or choose a tag. 3. Type the **Message**, up to 1,000 characters. 4. Click **Send to Members**, and confirm. The line below the card says how many members it reached. It goes to every member who has set up an account, apart from you, since no one else can sign in to read it. To reach members who haven't set up their accounts, send a letter. A mass message appears as a message from the Guilde. A member who replies writes to you. Mass messages are free on every plan. #### When a member says letters have stopped **Takes:** a few minutes. **Have ready:** the member's name. Most often, the member clicked **Unsubscribe** in a letter, which stops that Guilde's letters to them, or turned off letters on their **My Account** page. Only the member can turn letters back on. To see who has opted out, download the member list: the gets_letters column says no for each one (see "Download the member list"). To turn them back on, the member follows "Stop one Guilde's letters but not another's," under "Choose which emails you get." If the member's row on the **Members** page shows **Undeliverable**, their address bounced, and letters will skip it until it's fixed. See "Getting help" in Part 3. ### Events Events live under **Events** in the menu. Every member sees the calendar and can say whether they're going. Only admins create, change, and cancel events. Events and free tickets work on every plan, including Guilde Free. The **Events** page has two views, **List** and **Calendar**. The list shows **Upcoming** or **Past** events, and the box beside them shows one type of event at a time. A repeating meeting appears in the upcoming list once, at its next date. The calendar shows every date. #### Create an event **Takes:** about five minutes. **Have ready:** the date, time, and place, and a sentence or two about the event. Part 1, task 5, covers the basic steps. The form has more: - **Event type** is one of Meeting, Lecture, Cleanup, Tour, Social, Fundraiser, or Other. - **End** must be after **Start**. - **Video call link** is for members joining online. Only signed-in members see it, never the public page. - **Show on the public Guilde page** puts the event on your public page. Only a public Guilde has this box. "Show an event on your public page and on GuildeHall's events directory," below, explains what that does. - **Email every member about this event** is checked to start with. Uncheck it for an event members don't need to hear about by email, and always for a test. Members get a notice in GuildeHall either way. - **Held since** and **This year's number** are for a yearly tradition, such as "Held since 1952" or "the 41st annual." They appear only on GuildeHall's events directory, so fill them in only if you know them. - **Free ticketing** lets people register for tickets. "Take free tickets for an event" explains it. - **Volunteer roles** lists jobs members can sign up for. "Ask for volunteers" explains them. If you administer more than one Guilde, the form first asks **Which Guilde is this event for?** After you click **Create event**, the event appears in the list. No message confirms it. ##### Add a cover image A cover image runs across the top of the event's page in GuildeHall and on its public page. 1. Open the event and click **Add cover image**. 2. Choose a JPEG, PNG, or WebP picture of 10MB or less. A wide picture works best, because the pages show it twice as wide as it is tall. **Replace cover image** changes it later, and **Remove cover** takes it off after you confirm. Each date of a repeating meeting has its own cover, so adding one to the first date doesn't add it to the others. #### Set up a meeting that repeats **Takes:** about five minutes. **Have ready:** nothing. 1. In the **Create event** form, set the **Start** and **End** of the first meeting first, because the choices in **Repeats** are worded from that date. 2. In **Repeats**, choose **Weekly**, **Monthly on day [N]**, or **Monthly on the [1st] [Tuesday]**. 3. In the box that appears beside it, choose how often: every week or month, or every 2, 3, 4, 6, or 12. 4. Set **Until** to the last date you want on the calendar. 5. Fill in the rest of the form, and click **Create event**. GuildeHall creates every date at once, up to two years ahead or 100 dates, whichever comes first. Dates past that limit aren't created, and no warning says so. Meetings stay at the same time of day through the change to and from daylight saving time. A meeting set for day 29, 30, or 31 skips any month without that day. A meeting set for the 5th week of the month skips months without one. Each date keeps its own list of who's going and its own volunteer sign-ups. The pattern and the **Until** date can't be changed afterward. To change them, cancel the remaining dates (see "Change or cancel an event") and create a new repeating meeting. ##### Change the details of a repeating meeting 1. Open one date of the meeting and click **Edit**. 2. Make the change. 3. Under **Apply changes to**, choose **Only this date**, or **This and all future dates**. 4. Click **Save changes**. **This and all future dates** copies every field in the form to the later dates, not only the one you changed. A change of time moves each later date by the same amount, and earlier dates never change. Volunteer roles and **This year's number** change on this date only. #### Show an event on your public page and on GuildeHall's events directory **Takes:** a minute. **Have ready:** nothing. The steps are in Part 1, task 5, under "Change whether an event is on your public page." Once the box is checked, a **View public page ↗** link under the event's title opens its own public page. This works only for a public Guilde. A private or secret Guilde has no public page, so its events don't have the box. ##### What the public sees Your public page lists up to five upcoming public events, each repeating meeting once, at its next date. Each event links to its own page, which shows the time, place, description, and cover image, with links to add it to a calendar. A ticketed event's page also takes tickets. Public pages show how many people are going, never their names, and never the video call link. ##### GuildeHall's events directory A public Guilde's public events also appear on GuildeHall's directory of events at guildehall.com/events, until each one ends. Part 1, task 5, says how to keep them off it. The change takes effect at once. Members-only events are never listed. #### Take free tickets for an event **Takes:** a few minutes. **Have ready:** nothing. Free tickets tell you how many people to expect, give each party a confirmation code to show at the door, and stop registrations when the event is full. 1. In the **Create event** form, or in **Edit** on an existing event, check **Free ticketing**. 2. In **Capacity**, type the number of places, or leave it blank for no limit. 3. Click **Create event** or **Save changes**. The event shows a **Ticketed** label. ##### How people register - **Members** open the event in GuildeHall, choose how many tickets, and click **Get tickets**. That also marks them as going. - **Anyone else**, if the event is on your public page, fills in their name and email on the event's public page and clicks **Get free tickets**. They don't need an account. On Guilde Standard and Premium, they can also check a box to get the Guilde's email updates, which they then confirm by email. One registration can be for 1 to 10 people. Registration stays open until the event ends, so people can register at the door. When the event is full, the page says it's at capacity and takes no more. Each person who registers gets an email titled "You're registered: [event title]" with their confirmation code, links to add the event to a calendar, and a **Manage registration** button. That button lets them change the size of their party or cancel, without signing in. A secret Guilde has no pages outside GuildeHall, so its emails work differently. A member's email has an **Open the event** button instead, which opens the event in GuildeHall, where they can change their party or cancel once signed in. Someone without an account in the Guilde, such as a walk-in you add, gets no button and is asked to tell the Guilde about any change. Both get a Google Calendar link only. The public registration form takes 30 registrations an hour from one internet connection, enough for a crowd sharing the venue's Wi-Fi. Past that, add people yourself as walk-ins (see the next task). #### Check people in at the door **Takes:** a few minutes to set up, then a tap for each arrival. **Have ready:** a phone or tablet signed in to GuildeHall as an admin. The **Registrations** card on a ticketed event's page is the door list, and it fits a phone screen. 1. Open the event. The **Registrations** card shows how many tickets are taken and how many people have checked in. 2. When someone arrives, find them by scrolling, or by typing their name, email address, or confirmation code into the search box, which appears once more than three people have registered. 3. Tap the circle beside their name. It fills in to show the whole party has checked in. Tap it again to undo. ##### Add someone at the door 1. Tap **Add walk-in**. 2. Type their **Name**, and their **Email (optional)** if they'd like a confirmation. Set **Tickets** to the size of their party. 3. Tap **Add**, then tap their circle to check them in. Walk-ins count toward the **Capacity**, but you can add them even when the event is full. The card then shows more tickets taken than the capacity, and the public page still takes no more registrations. ##### Change or cancel a registration **Edit** on a row changes the number of tickets, even past the capacity. **Cancel** cancels the registration after you confirm. If the person gave an email address, they get an email titled "Registration cancelled: [event title]," unless the event has already ended. A cancelled registration stays in the list, grayed out, with a **Restore** button that puts it back without an email. ##### Download the list Click **Export CSV**. A file named event_registrations.csv downloads, with each registration's name, email, number of tickets, status, how they registered (member, public, or admin), confirmation code, and the times they registered and checked in. The times are in Coordinated Universal Time, five hours ahead of Eastern time in winter and four in summer. #### Record who attended **Takes:** a few minutes. **Have ready:** nothing. For an event without tickets, you can record which members came. A ticketed event uses check-in instead. 1. Open the event and click **Attendance**. 2. Check each member who came, and click **Save attendance**. To find someone, type part of their name in the search box at the top of the window. The window lists every member of the Guilde, whether or not they answered, with their answer beside their name. Members who said Going come first, then Maybe, then everyone else. Unchecking a name and saving takes them off the list. The **Attendance** card on the event's page then lists who came. On Guilde Standard and Premium, **Email attendees** on that card starts a letter to the members who said they were going, which isn't the same as the members you marked. #### Ask for volunteers **Takes:** a few minutes. **Have ready:** nothing. 1. In the **Create event** form, or in **Edit** on an existing event, click **+ Add role** under **Volunteer roles**. 2. Type the role, such as "Set up chairs," and the number of people needed, up to 20. 3. Repeat for each role, and save the event. The event's page shows each role with how many places are filled and who has signed up. Members sign up with **Sign up** and change their minds with **Withdraw**. Admins can't sign up someone else. Nobody is notified when a member signs up, so check the event's page. Each date of a repeating meeting has its own roles and sign-ups. You can rename a role or change its number of places without losing anyone who has signed up. If you set the number lower than the people already signed up, GuildeHall keeps it at the number signed up. Removing a role removes its sign-ups. #### Change or cancel an event ##### Change an event 1. Open the event and click **Edit**. 2. Make your changes, and click **Save changes**. If the event takes tickets and you change its time or place, the form shows **Email registered attendees about the new time or location**, checked. Leave it checked to email everyone registered with the new details. With **This and all future dates**, only people registered for the date you opened are emailed. Members who only said they're going, without tickets, aren't told about changes, so send them a letter or a mass message. The public setting and the cover image are changed on the event's page, outside the **Edit** window. ##### Cancel an event 1. Open the event and click **Cancel event**, in red, set apart from **Edit**. 2. For a one-off event, click **Cancel the event**. For one date of a repeating meeting, click **Cancel only this date**, or **Cancel this and all future dates**. A cancelled event can't be brought back. Everyone who answered Going, Maybe, or Can't go gets a notice in GuildeHall. Everyone with a ticket and an email address also gets an email titled "Cancelled: [event title]," and so does every member who answered Going or Maybe, unless they've turned off letters from this Guilde or from every Guilde. Nobody gets two emails about the same date, though cancelling several dates sends one for each. No email goes out for a date that has already passed. The event disappears from the **Events** list and calendar. Its public page says it has been cancelled, and GuildeHall's events directory shows it as cancelled until its date passes. #### What members see Members open **Events** to see what's coming. For each event without tickets, they choose **Going**, **Maybe**, or **Can't go**, either in the list or on the event's page. The event's page shows how many have answered each way, with names, to the Guilde's members. A member's answer is the Guilde's record of who's coming. It doesn't send them reminders, though each event's page has links to add it to their own calendar. ### Documents and committees #### Share the bylaws, minutes, and other documents **Takes:** a minute for each document. **Have ready:** the file on your computer. Every member can open the **Documents** page. Only admins add, change, and delete documents. Members aren't notified when a document is added. 1. In the menu, click **Documents**. If you belong to more than one Guilde, check the Guilde's name at the top of the page first, because the document goes into that Guilde. To change it, click the name and choose another. Then click **Upload document**. 2. Type a **Title**, such as "Bylaws, as amended 2025," and a **Description** if you like. 3. Choose a **Category**: Bylaws, Minutes, Newsletter, Annual Report, Policy, or Other. 4. Choose who can see it in **Visibility**. See the next task. 5. Under **File**, choose the file, and click **Upload**. The file can be a PDF, a Word, Excel, or PowerPoint file, a plain text or CSV file, or a JPG, PNG, or GIF image, up to 25MB. GuildeHall refuses other kinds, including iPhone HEIC photos and WebP images. Documents in the Bylaws and Policy categories are pinned. They always appear first, under "Reference documents," so members can find the bylaws however many minutes come after them. Everything else follows, newest first. ##### Open, change, or delete a document Click a document's title to open it in a new tab, or **↓** to download it. On a phone, tap the row, then **View** or **Download**. On an iPhone, **View** opens the document in place of the page, and the back arrow returns to the list. **Download** asks whether to download the file, and saves it in the Files app. To change a document's title, description, category, or visibility, click **Edit** beside it, make the change, and click **Save changes**. A document's file can't be replaced. Delete it and upload the new version. **Delete** removes the document and its file after you confirm. It can't be undone. Once the Guilde has documents, a search box and category buttons appear above the list. The search looks at titles only. #### Control who can see a document **Takes:** a minute. **Have ready:** nothing. Each document is visible to **All members** or **Admins only**. Choose when uploading, or change it later with **Edit**. An admins-only document doesn't appear in members' lists, and only admins of the Guilde can open it. Admins see it with an **Admins only** label. Use it for drafts, finances, and anything the board hasn't approved for members. #### Set up a committee and its page **Takes:** about fifteen minutes. **Have ready:** the committee's name, who chairs it, and who serves on it. A committee has its own page in GuildeHall, with a list of its members, a discussion board, documents, and a task list. Every member of the Guilde sees the committee in the list, but only its members and the Guilde's admins can open its page. ##### Create the committee 1. In the menu, click **Committees**, then **New committee**. 2. Type the **Name**, and a **Description** if you like. 3. If you administer more than one Guilde, choose the **Guilde**. 4. Click **Create**. The committee appears in the list. Creating it doesn't make you a member, so add yourself if you serve on it. ##### Add its members and chair 1. Open the committee, and on the **Overview** tab click **Add member**. 2. Start typing a name in **Search member**, and choose the person from the list. Only members of the Guilde who have set up their accounts appear. 3. In **Role**, choose **Member** or **Chair**. 4. Click **Add member**. 5. Repeat for each member. **Make chair** and **Demote** beside a name change their role, and **Remove** takes them off the committee after you confirm. A chair can do everything an admin can on the committee's page, except remove another chair or close the committee. ##### Write the committee's page 1. On the committee's page, click **Set up page**. 2. Under **About this committee**, write what it does, when it meets, and how to help. 3. To add links, such as a sign-up sheet or a shared folder, click **+ Add link** and fill in a label and a web address starting with https://. 4. Click **Save**. The text appears at the top of the committee's page, for its members and the Guilde's admins. The **Edit** button beside the text changes it later. ##### Rename or close a committee To change the committee's name or description, click **Edit** beside its name at the top of its page, make the change, and click **Save**. The chair or any admin can do this. When a committee's work is done, an admin can close it: 1. On the committee's page, click **Close committee**, beside its name. 2. Confirm. A notice at the top of the page says the committee is closed. It leaves the list of committees for everyone except admins, who see it under "Closed committees" at the bottom of the list. Its page, members, documents, discussion, and tasks are all kept. To bring it back, an admin opens it from "Closed committees" and clicks **Reopen**. ##### Use the tabs - **Discussion** holds the committee's own threads, apart from the Guilde's forum. **+ New Thread** starts one. - **Documents** holds the committee's files. Committee members upload with **Upload**, and the chair or an admin can delete them. They take the same kinds of file as the Guilde's documents. - **Tasks** is a to-do list. **New task** adds one, with an assignee and a due date if you like. **Start**, **Complete**, and **Reopen** move a task along, and an overdue task is marked in red. Nobody is reminded of due dates, so check the list at each meeting. ### The wall and the forum The wall and the forum both hold members' posts, for different purposes. The **Wall** is a notice board for short news and reminders. It keeps the Guilde's 50 most recent posts and removes older ones, without warning. Posts on the public page don't count toward the 50 and are never removed. The **Forum** is for longer conversations worth keeping, sorted by topic, and nothing in it expires. Any member can post on either. There's no charge for them on any plan. #### Post an announcement on the wall **Takes:** a minute. **Have ready:** nothing. 1. In the menu, click **Wall**. 2. Type the announcement in the box at the top, up to 500 characters. 3. To add pictures, click **+ Add images** and choose up to four JPEG, PNG, GIF, or WebP files of 5MB or less each. **+ Add another** adds more, up to four in all, and **×** beside a file's name takes it off. 4. If you belong to more than one Guilde, click **Choose…** beside **Post to**, check the Guilde or Guildes it's for, and click **Done**. **All my Guildes** checks every one. 5. Click **Post**. The post appears at the top of the wall, and a dot appears beside **Wall** in other members' menus until they look. Members aren't emailed about new posts. To mention a member, type @ and the start of their name, and choose them from the list. They get a notice in GuildeHall, and an email unless they've turned off **Mention notifications** under **My Account**. If you add a mention later by editing a post or reply, only the newly mentioned member is notified. Your own posts have **Edit** and **Delete**, and **Delete** asks you to confirm. Under any post, **Replies** shows the replies, which GuildeHall also calls comments, and a box to add one. Your own replies have **Edit** and **Delete** too. **Edit** opens the reply in a box, with **Save** and **Cancel**. Admins see **Delete** beside every reply under their Guilde's posts. **Delete** asks you to confirm, and the reply is replaced with "This reply was removed." so the replies around it still read in order. Any reports about a deleted reply are marked dealt with. A deleted reply can't be brought back. ##### Put a post on your public page In a public Guilde, admins see **Show on public page** under every post. Click it to add the post to the "Recent posts" card on your public page, which shows the five most recent you've chosen, without pictures, and names the writer by first name and last initial. The post shows an **On public page** label. **Remove from public page** takes it off. Private and secret Guildes have no public page, so they don't have this button. A post on the public page stays on the wall for as long as it's there. Once you take it off, it counts toward the wall's 50 again. ##### Hide someone else's post Admins see **Hide** beside other members' posts. Click it and confirm. The post comes off the wall for everyone, including the person who wrote it, and any reports about it are marked dealt with. GuildeHall doesn't tell the writer, so speak to them if it's needed. To put the post back, click **Moderation** at the foot of the "Needs your attention" list on the **Admin Dashboard**, then **Hidden**, then **Unhide** beside the post. #### Organize the forum **Takes:** a few minutes for each job here, or about ten to set up categories. **Have ready:** nothing. ##### Start a thread 1. In the menu, click **Forum**, then **+ New Thread**. 2. Type a **Title**, choose a **Category** if you like, and write the **Content**, up to 5,000 characters. The **B**, **I**, and **Quote** buttons format the text. 3. Click **+ Add image** to attach up to four pictures, if you like. 4. Click **Create Thread**. You're subscribed to the thread automatically, so you get a notice in GuildeHall when someone replies. Members can also get an email for each reply by turning on **Forum replies** under **My Account**. It starts off. ##### Set up categories Categories sort the forum by topic. Every Guilde starts with General, Announcements, Questions, and Planning. 1. On the **Forum** page, click **Manage** beside the category buttons. 2. To add one, type it in **New category name** and click **Add**. 3. **Rename** changes a category's name, and the arrows reorder the list. **Delete** removes a category after you confirm, and leaves its threads in place, without a category. Members click a category button to see only its threads. The search box searches every thread and reply. ##### Pin, lock, or delete a thread Open the thread and click **⋯** beside **Subscribe**: - **Pin to the top** keeps the thread at the top of the forum, for standing information such as how to reach the board. **Unpin from the top** reverses it. - **Lock replies** stops members from replying. Admins can still reply, for example to add a closing note, and the reply box tells them so. **Allow replies again** reverses it. - **Delete thread** deletes the thread and every reply after you confirm. It can't be undone. GuildeHall asks you to confirm before pinning, unpinning, or locking a thread. A member who started a thread can delete it while nobody has replied. Members delete their own replies with **Delete**, after confirming, and admins can delete anyone's, leaving "This post was removed." in its place. The opening post of a thread can't be deleted on its own. Delete the thread instead. ##### Add a poll Polls are added when a thread is started, not afterward. 1. In the **New Thread** form, click **+ Add a poll**. 2. Type the **Poll question**, and two to six **Options**. Click **+ Add option** for more. 3. To end voting on a date, set **Closes**. Otherwise it stays open until someone closes it. 4. Create the thread. Members vote once and can change their vote until the poll closes. They see the results after voting. The thread's author or an admin can click **Close poll** at any time, and confirm. ##### If your Guilde belongs to a Council A Guilde in a Council shares the Council's forum with the other Guildes in it, and has no forum of its own. The top of the **Forum** page says so. Admins of every Guilde in the Council can pin, lock, and delete threads and change the categories, including your Guilde's. A committee's discussions stay with the committee either way. "Join a Council" explains Councils. #### Handle a reported post **Takes:** a few minutes. **Have ready:** nothing. Any member can report a wall post, a reply, or a forum post by clicking **⋯** beside it, choosing **Report**, and giving a reason. GuildeHall doesn't email admins about a report. The **Admin Dashboard** lists it under "Needs your attention," and a dot appears beside **Admin Dashboard** in the menu. 1. On the **Admin Dashboard**, click the line about posts reported for review. The **Moderation** page opens, showing open reports. 2. Read the reason and the reported text. 3. Choose what to do: - **Hide Post** takes a wall post off the wall. **Hide Comment** replaces a reply with "This comment has been hidden by a moderator." GuildeHall asks for a reason, which only admins see. - **Delete Post** removes a forum post, leaving "This post was removed." in the thread. - **Mark Resolved** closes the report without removing anything, when the post is fine. Hiding a post or reply also closes its report. After deleting a forum post, click **Mark Resolved** as well. Neither the writer nor the person who reported it is told. The **Resolved** tab lists reports already dealt with. The **Hidden** tab lists the wall posts and replies hidden in this Guilde, newest first, with the reason given. Click **Unhide** to put one back on the wall. A deleted forum post can't be brought back. ### Your public page Every public or private Guilde has a page on the open web. It's how people who aren't members find the Guilde, and search engines and AI assistants read it too. #### See your public page as a stranger sees it **Takes:** a few minutes. **Have ready:** nothing. The steps are in Part 1, task 2, under "Look at your public page." Any member can open the page that way. A secret Guilde has no public page. ##### What a public Guilde's page shows From top to bottom, a public Guilde's page shows only the sections it has something for: - The Guilde's name, its city and state, and its **About** text. - **Meetings**: the meeting schedule, place, and address. With only an address filled in, the card is headed **Location**. - **Become a member**, if the Guilde takes dues online, with its membership tiers and a **Join** button. See "What members see when they pay." - **Get updates by email**, where visitors join the mailing list. It appears only on Guilde Standard and Premium. - **Upcoming events**: up to five events you've chosen to show. - **Recent posts**: up to five wall posts you've chosen to show. - **Recent letters**: up to five sent letters you've chosen to show. - **Officers**: the Leadership list, by title and first name and last initial. - **Part of**: the Council the Guilde belongs to, if any. - **Get in touch**: a form for questions, which arrive on your **Inquiries** page. - **Find us online**: the website, public email, and Facebook page. The details come from **Settings**, in **Guilde Details**. The roster, documents, the forum, and members-only events never appear. ##### What a private Guilde's page shows A private Guilde's page shows its name, its city and state, "Membership by approval," and a **Request to join** form. Requests arrive on your **Inquiries** page, as "Answer people who write through your public page" explains. #### Choose public, private, or secret **Takes:** a minute. **Have ready:** nothing. Part 1, task 2, covers the setting itself, under "Choose who can find your Guilde." Changing it later has these effects: - Leaving public takes down the public event pages, the email signup form, online joining, the public letters archive, and the Guilde's listings on GuildeHall's events directory. Members, posts, events, and the mailing list are unaffected. They all come back if the Guilde becomes public again. - A private Guilde keeps a short page with the request form. A secret Guilde's page is removed entirely, so its old address shows "not found." - A Guilde in a Council, or waiting to join one, can't become secret. GuildeHall asks you to leave the Council, or cancel the request, first. GuildeHall doesn't ask you to confirm the change. The card says "Saved" as soon as you click **Save**. #### Join a Council **Takes:** a few minutes, then a wait for GuildeHall's approval. **Have ready:** nothing. A Council joins Guildes of the same kind, such as the neighborhood associations of one city, so they share a forum and appear together on a Council page. GuildeHall sets up each Council and approves each Guilde that asks to join. A Guilde belongs to one Council at most, and a secret Guilde can't join one. The **Council Memberships** card appears on **Settings** once there's a Council your Guilde could join. If your Guilde has forum threads, delete anything private from the forum before you start, because the Council's other Guildes will be able to read them. 1. On **Settings**, in the **Council Memberships** card, click **Browse Councils to join**. 2. Read the Councils listed, and click **Request to join** beside one. 3. If your Guilde has forum threads, check the box confirming you understand the Council's other Guildes will be able to read them. 4. Click **Send request**. The card says the request is waiting for approval and shows **Pending approval**. When GuildeHall approves it, every admin of your Guilde who has set up their account gets an email titled "[Guilde name] has joined the [Council name] Council," saying how many forum threads moved, if any did, and the card shows **Active**. **Cancel** withdraws a pending request after you confirm. ##### What changes when you join Your Guilde's forum threads move into the Council's forum, and from then on your members use the Council's forum, shared with the other Guildes. Committee discussions don't move. Your public page lists the Council under **Part of**. To leave, click **Leave** in the card and confirm. Threads your Guilde wrote stay in the Council's forum, and your members stop seeing them. Your Guilde starts a new forum of its own. ### Your plan The **Guilde Plan** card on **Settings** shows which plan your Guilde is on. "What's free, and what the Standard plan adds," at the front of this manual, compares the plans. #### Move to the Standard plan **Takes:** about five minutes. **Have ready:** the card the Guilde pays with. Part 1, task 2, has the steps, under "Check your plan." Annual billing is chosen to start with, and costs ten months' price for twelve. Once Stripe confirms the payment, usually within a minute, the Guilde can send letters, set up online dues, and grow past 150 members. GuildeHall doesn't send a separate email to confirm the plan. If your Guilde is a charter Guilde, the card says "complimentary" through a date, and there's nothing to pay or manage. #### Change your billing or card **Takes:** a few minutes. **Have ready:** the new card, if you're changing it. 1. On **Settings**, in the **Guilde Plan** card, click **Manage billing**. Stripe's billing page opens. 2. On Stripe's page, change the card, update the billing name, email, address, or phone, see and download past invoices, change the plan, or cancel it. 3. Click **Return to GuildeHall Network**, at the left, when you're done. To move between Standard and Premium, or between monthly and annual billing, click **Update subscription**. Choose **Monthly** or **Yearly** at the top, click **Select** beside the plan, and click **Continue**. Stripe shows what the Guilde will pay, and from when, before you click **Confirm**. The **Guilde Plan** card on **Settings** shows the new plan straight away. Cancelling takes effect at the end of the period already paid for, with no refund for the rest of it. Until then the Guilde keeps its plan, and the card says it ends on that date and won't renew. Stripe's page lets you take the cancellation back before then. If a payment fails, the card says "There's a problem with this Guilde's payment," with an **Update card** button that opens the same page. Every admin who has set up their account also gets an email. While Stripe tries the card again, the plan stays on. ##### If the plan ends The Guilde returns to Guilde Free, and nothing is deleted. - Drafts of letters are kept, and new ones can be written, but not sent. A letter scheduled for after the plan ends goes back to the drafts instead of going out, and the officer who scheduled it gets a notice under the bell. - The Guilde stops collecting dues online. Members can't pay online, and the public page's **Become a member** card disappears. Within the hour, every automatic renewal is set to stop at the end of the term the member has already paid for. Nothing is refunded, and nothing more is charged. Each of those members gets an email saying their membership won't renew automatically and asking them to pay the treasurer directly from then on. You can still record cash and check payments, and the payment history stays. - If the Guilde returns to Standard, members who want automatic renewal turn it back on themselves, on their **Membership** page, or, once their term has ended, pay again with automatic renewal on. - If the Guilde has more than 150 members, nobody is removed, but no one new can be added until it's below 150 or back on Standard. ### Your own account These tasks are for every member, officers included. Most are on the **My Account** page, which opens from the menu. One account covers every Guilde you belong to, so these settings apply in all of them. **My Account** starts with **Personal Information**: your name, a few lines **About Me** shown on your profile, a **Forum Signature** shown under your forum posts, and your phone, date of birth, and address. Click **Save Changes** after changing them. **See your profile as other members see it**, at the top, shows the result. #### Change your password **Takes:** a minute. **Have ready:** nothing. 1. On **My Account**, find **Change Password**. 2. Type your **Current Password**, then the new one in **New Password** and again in **Confirm New Password**. It needs at least eight characters, including an uppercase letter, a lowercase letter, a number, and a symbol such as ! or #. The list under **New Password** ticks off each rule as you meet it. 3. Click **Change Password**. A message says your password has changed. Any other computers and phones where you were signed in are signed out, and need the new password. This one stays signed in. ##### If you've forgotten it 1. On the sign-in page, click **Forgot your password?** 2. Type your email address and click **Send Reset Link**. 3. Open the email titled "Password Reset - GuildeHall Network" and click **Reset Password**. The link works for one hour. 4. Type the new password twice, and click **Reset Password**. The page says your password has been reset, and **Sign In** takes you back. Resetting a password signs you out on every computer and phone, so sign in again on each with the new one. It doesn't turn off two-step sign-in. #### Use two-step sign-in, and what to do without your phone **Takes:** about ten minutes to set up. **Have ready:** nothing. Part 1, task 1, covers turning it on. The **Two-step sign-in** section appears on **My Account** for admins, and for anyone who has it on. ##### Sign in without your phone On the sign-in page, after your password, click **Don't have your phone? Use a backup code**, and type one of the ten backup codes you saved. Each code works once. The **Two-step sign-in** section says how many you have left. ##### Move it to a new phone 1. Sign in, using the code from your old phone or one of your backup codes. 2. On **My Account**, in **Two-step sign-in**, click **Turn off**. Type the code from your app, or a backup code, and click **Turn off** again. 3. Set it up again on the new phone, as in Part 1, task 1. Setting it up again also gives you a fresh set of backup codes. Do the same when you're down to your last two or three. ##### If you've lost your phone and your backup codes No one in your Guilde can reset it. Write to GuildeHall, as the sign-in page says, and see "Getting help" in Part 3. #### Control what other members see about you **Takes:** a minute. **Have ready:** nothing. On **My Account**, under **Privacy Settings**, each switch saves the moment you click it, and "Saved" appears briefly: - **Show email address**, **Show phone number**, and **Show address** let other members see each on your profile. All three start off. - **Appear in roster** lists you in the member directory. It starts on. Turned off, you're also left out of the names suggested when someone types @ to mention a member. Admins still see you in the directory. - **Allow direct messages** lets other members write to you. It starts on. Admins of your Guilde can always see your email address, phone, address, and date of birth, because they keep the member list. Members of other Guildes in the same Council see only your name and what you've written about yourself. Nobody else can see your profile. #### Choose which emails you get **Takes:** a minute. **Have ready:** nothing. On **My Account**, under **Email Preferences**, each switch saves the moment you click it: - **Guilde newsletters**: letters and event announcements from your Guildes. Turning this off stops them from every Guilde. - **Mention notifications**: when someone mentions you with @. - **Direct messages**: when another member writes to you. - **Comments on my posts**: when someone replies to your post on the wall. - **Forum replies**: when someone replies to a forum thread you follow. This one starts off, because a busy thread can send a lot of mail. Emails about your account, such as password resets, invitations, ticket confirmations, and the thank-you for dues paid online, always arrive. ##### Stop one Guilde's letters but not another's If you belong to more than one Guilde, click **set newsletter preferences per Guilde** under **Email Preferences**. A page opens listing each Guilde, with **Mute** or **Resume** beside it. The **Unsubscribe** link at the foot of any letter opens a page with an **Unsubscribe from [Guilde name]** button, which stops only that Guilde's letters. **Email preferences**, beside it, opens the page of every Guilde. To start receiving a Guilde's letters again after unsubscribing, open that page and click **Resume**. If **Guilde newsletters** is off on **My Account**, turn it back on as well. #### Work in more than one Guilde **Takes:** nothing to set up. **Have ready:** nothing. One account holds every Guilde you belong to. Some pages combine them, and others take one Guilde at a time: - **Wall**, **Events**, **Messages**, and your notices under the bell at the top of the screen combine every Guilde. Each post, event, and message is marked with the Guilde it belongs to. - **Home**, **Roster**, **Documents**, **Forum**, and **Membership** take one Guilde at a time. The Guilde's name sits at the top of the page with a small arrow beside it. Click the name to open a list of your Guildes, and click another to switch. GuildeHall remembers the one you last chose. - The **Admin** pages work on one Guilde at a time. If you're an admin of more than one, the Guilde's name appears under "Administering" at the top of every **Admin** page. Click it and choose another Guilde to switch. The top of the menu reads **My Guildes** instead of a Guilde's name, and takes you to the home page of the Guilde you last chose. On another member's profile, and in a message with them, "Also in" lists the Guildes you share. #### Leave a Guilde **Takes:** a minute. **Have ready:** nothing. 1. On **My Account**, find **Your Guildes**, which lists every Guilde you belong to. 2. Click **Leave** beside the Guilde, and confirm. GuildeHall opens your home page, and the Guilde is gone from your menu and pages. You come off its member list and its **Leadership** list. Any automatic dues renewal stops, so you aren't charged again, and the time you've already paid for runs to its end date. Your posts, replies, and forum threads stay where they are, and your account and your other Guildes aren't affected. The Guilde's admins aren't emailed, but its **Audit Log** records that you left. To come back, ask one of its admins to add you again. If you're the Guilde's only admin, GuildeHall won't let you leave until you make someone else an admin on the **Members** page. If Stripe can't be reached to stop an automatic renewal, you stay in the Guilde, and the message asks you to try again in a few minutes. #### Put GuildeHall on your phone's home screen **Takes:** a minute. **Have ready:** nothing. GuildeHall isn't in the app stores. You can put it on your phone's home screen instead, where it opens like an app, without the browser's address bar. - On an iPhone, open network.guildehall.com in Safari. Tap the Share button, a square with an arrow pointing up. It's in the address bar, or under **⋯** at the bottom right, depending on how Safari is set up. Then tap **View More**, then **Add to Home Screen**. Leave **Open as Web App** on, and tap **Add**. If there's no **View More**, **Add to Home Screen** is in the list the Share button opens. - On an Android phone, open network.guildehall.com in Chrome. Tap **⋮** at the top right, then **Add to home screen**, or **Install and create shortcut** in newer versions of Chrome, then **Install**. The icon is GuildeHall's G crest, named "GuildeHall." The first time you open it, sign in again: the home-screen icon keeps its own sign-in, apart from the browser's. After that it opens to your Guilde's home page. GuildeHall doesn't send phone notifications. #### Download your data, or delete your account **Takes:** a minute. **Have ready:** nothing. At the bottom of **My Account**, under **Account**: - **Download my data** saves a file of everything GuildeHall holds about you: your profile, memberships, posts, messages, and more. - **Delete account** removes your account after you type DELETE and click **Permanently delete**. Your name and contact details are cleared, and your posts stay with "[deleted]" in place of your name. It can't be undone. If you're the only admin of a Guilde with other members, GuildeHall won't delete your account until you make someone else an admin, or delete the Guilde under **Settings**, so the Guilde isn't left with nobody to run it. ## Part 3: Help This part answers common questions about GuildeHall, explains how to reach GuildeHall when something goes wrong, and defines the words the app uses. The printed manual ends with an index. ### Frequently asked questions #### Do members pay anything to use GuildeHall? No. Members never pay GuildeHall, and they can belong to as many Guildes as they like. Your Guilde pays for its plan, and Guilde Free costs nothing. Dues are what your Guilde charges its own members, and the money goes to your Guilde. #### Do we have to collect dues online? No. On every plan, including Guilde Free, you can add membership tiers, record checks and cash, and see who has paid. Collecting dues online needs Guilde Standard. If some members still pay by check, record those payments as "Record a check or cash payment" describes. #### Does GuildeHall take a share of our dues? No. When a member pays online, the money goes from their card to your Guilde's own bank account, and GuildeHall takes none of it. Stripe, the payment company, keeps its fee of about 2.9% plus 30¢ for each card payment. #### What happens when we reach 150 members? On Guilde Free, no one new can join or be added once the Guilde has 150 members. Nobody already in it is removed, but invitations already sent can't be accepted until the Guilde moves to Guilde Standard. Mailing-list contacts don't count toward the limit. Guilde Standard lifts the limit, and "Move to the Standard plan" gives the steps. #### Does every member need to set up an account? No, only to use the site: to see the roster and documents, answer events, post, or pay dues online. Letters reach every member you've added, including those who haven't set up an account yet, unless they've unsubscribed. A member marked **Invited** already has a GuildeHall account and starts receiving letters once they accept. A member who never uses a computer can stay on the member list, and you can record their dues by check. #### Can members see each other's phone numbers and addresses? Only if each member chooses to show them. Members see each other's names. Email address, phone number, and mailing address are hidden until the member turns them on under **My Account**, and other members never see a date of birth. Admins see the full record, because they keep the member list. "Control what other members see about you" lists the settings. #### Who can see our Guilde on the internet? Anyone can find a public Guilde's full page. A private Guilde's page shows only its name, city and state, and a form to ask to join. A secret Guilde has no page at all. Nothing inside the Guilde, such as the roster, the wall, or the documents, is visible to anyone who isn't a member, unless an admin puts a post, event, or letter on the public page. A public Guilde's page also lists its Leadership. If your Guilde joins a Council, its forum is shared with the Council's other Guildes, whose members can also see your members' names and what they've written about themselves. "Choose public, private, or secret" explains the choice. #### Does GuildeHall show ads, track members, or use our content to train AI? No. GuildeHall has no advertising and no analytics, so no outside company sees what your members do on the site. Your members' posts, messages, and records are never used to train AI models. #### Can we see who opened a letter? No. Each letter shows how many copies were delivered and how many bounced, because members' email providers report it. GuildeHall doesn't record who opens a letter or clicks its links. "See who your letter reached" explains the counts. #### A member says they didn't get our letter. What should I check? First ask them to look in their spam or junk folder. Then check two things. On the **Members** page, a row marked **Undeliverable** means their address bounced, and letters skip it. In the member list you download from **Members** (see "Download the member list"), a **gets_letters** column reading "no" means the member turned the Guilde's letters off, or their address is **Undeliverable**. "When a member says letters have stopped" explains what to do in each case. #### Can one person belong to more than one Guilde? Yes, with a single account. Pages such as **Wall** and **Events** combine all of a person's Guildes, and pages such as **Roster** and **Documents** show one at a time. "Work in more than one Guilde" explains how. #### Is there a phone app? No. GuildeHall isn't in the app stores, but members can put it on their phone's home screen, where it opens like an app. "Put GuildeHall on your phone's home screen" gives the steps for iPhone and Android. #### What happens when our officers change? The outgoing officers make the incoming ones admins, update the Leadership list, and hand over the Stripe account, then step down. The Guilde's records stay where they are. "Hand the Guilde over to next year's officers" gives the steps, in order. #### Can we take our records with us if we leave? Yes. Any admin can download the member list, the contacts, the payments, and each event's registrations as spreadsheet files, and documents can be downloaded one at a time. Each member can download everything GuildeHall holds about them from **My Account**. Online payments are also recorded in your Guilde's own Stripe account. #### Can we change our Guilde's name or web address? Any admin can change the name, in the **Guilde Details** card on **Settings** (see "Fill in the details" in Part 1, task 2). The web address of your public page stays the same, because letters, search engines, and other websites link to it. To change the web address, write to GuildeHall, as "Getting help" explains. ### Getting help Write to Brandon Quintin, GuildeHall's founder, at bquintin@guildehall.com, or call 802.735.6749. As of November 2026, he makes three promises to every Guilde: - He will set up your Guilde with you from start to finish, including importing your member list. - He will meet with your officers in person, or by phone or video call if that suits you better. - He will usually reply the same day. #### What to include Say which Guilde you're writing about, which page you were on, what you clicked, and what happened. A screenshot helps, attached to your email: - On a Mac, press Shift, Command, and 3 together. The picture is saved to your desktop. - On a Windows computer, press the Windows key, Shift, and S together, and drag across the screen. Then paste the picture into your email. - On an iPhone, press the side button and the volume-up button together. The picture is saved to Photos. - On most Android phones, press the power button and volume-down together. The picture is saved to your photo gallery. #### What only GuildeHall can do Some changes have no button in the app. Write to GuildeHall to: - Change the web address of your Guilde's public page. - Turn off two-step sign-in for someone who has lost both their phone and their backup codes. - Clear an **Undeliverable** mark once a member's email address works again. - Set up a Council, or approve your Guilde's request to join one. Write too if a Stripe screen doesn't match the steps in Part 1, task 4, or if anything in the app doesn't match this manual. #### Problems with Stripe itself GuildeHall can't sign in to your Guilde's Stripe account or change who owns it. If the owner of the Stripe account can't be reached, write to Stripe Support at support.stripe.com, as "Hand over the Stripe account" explains. ### Glossary These are the words the app and this manual use. Bold words inside a definition are the app's own labels, as they appear on screen. **Admin.** A member who can also open the **Admin** pages, where they add members, collect dues, send letters, and change the Guilde's settings. A Guilde can have as many admins as it likes. Officers are usually admins. **Admins only.** A setting on a document that hides it from members. Only the Guilde's admins can see and open it. **Authenticator app.** A free phone app, such as Google Authenticator or Microsoft Authenticator, that shows a new six-digit code every thirty seconds. Two-step sign-in uses it. **Automatic renewal.** A choice a member makes when paying dues online. Their card is charged again at the end of each membership period, until they or an admin stop it. **Backup codes.** Ten one-time codes GuildeHall gives you when you turn on two-step sign-in. Each one signs you in once without your phone. **Become a member.** A card on a public Guilde's page, shown when the Guilde takes dues online, where new people choose a membership, join, and pay in one step. **Bounced.** A letter that the reader's email provider refused. If the address doesn't exist, or the reader reported the letter as spam, the address is marked **Undeliverable**. A temporary refusal, such as a full mailbox, doesn't mark it. **Category.** A topic in the forum, such as General or Planning. Every Guilde starts with four, and admins can add, rename, or delete them. **Charter Guilde.** One of the first Guildes to join GuildeHall, which has Guilde Standard at no charge for the period in its agreement. **Committee.** A smaller group within the Guilde, with its own page, members, chair, discussion board, documents, and task list. **Communications.** The admin page where you write and send letters, send a mass message, and set your letters' masthead and color. **Contact.** A person on the Guilde's mailing list who isn't a member. Contacts receive letters, can't sign in, and don't count toward the 150-member limit. **Council.** A group of Guildes of the same kind, such as the neighborhood associations of one city, which share a forum and a public page. GuildeHall sets up each Council. Joining one is optional. **CSV file.** A plain spreadsheet file that Excel, Numbers, and Google Sheets can open and save. GuildeHall imports member lists from CSV files and exports its lists as CSV files. **Danger Zone.** The card at the bottom of **Settings** that holds making another member an admin, **Step down as admin**, and deleting the Guilde. **Dispute.** A member's request to their bank to reverse a card payment. GuildeHall emails the admins and marks the payment **Disputed**. **Dues.** What your Guilde charges its members. Members pay them online or by check or cash, and the money goes to the Guilde. GuildeHall takes none of it. **Events directory.** GuildeHall's public list of events at guildehall.com/events. A public Guilde's public events appear there unless the Guilde turns the listing off. **Forum.** The place for longer conversations worth keeping, sorted by category. Nothing in it expires. **gets_letters.** A column in the downloaded member list. It reads "no" for a member who has turned off the Guilde's letters or whose address can't receive mail. **Guilde.** Any group on GuildeHall: an association, club, society, or other organization. **Guilde Free, Guilde Standard, Guilde Premium.** The three plans. Free costs nothing for up to 150 members and sends letters to all of them. Standard adds collecting dues online and the full newsletter, and lifts the limit. Premium adds priority support. **Inquiry.** A message sent through the **Get in touch** or **Request to join** form on your public page. Inquiries arrive on the **Inquiries** page. **Invitation.** The email a person receives when you add them and they already have a GuildeHall account, for example from another Guilde. Their row shows **Invited** until they accept. **Invite link.** A web address you share so that people can join the Guilde themselves, without an officer adding them. **Join link.** The address of your public page's join-and-pay form, shown on the **Dues** page once members can pay online. **Lapsed.** A member who has paid dues before and whose membership has ended. A lapsed member keeps using GuildeHall as before. **Leadership.** The list of officers and their titles shown on your home page and public page. Being on it doesn't make someone an admin. **Letter.** An email from your Guilde to its members, its contacts, or both, written on **Communications**. It's what a newsletter service such as Mailchimp sends. **Letter color.** The color used for headings, links, and buttons in your Guilde's letters. **Lock.** Stopping new replies to a forum thread. **Mass message.** A notice sent inside GuildeHall, to **Messages** and the bell at the top of the page, with no email. **Masthead.** A standing header image that every new letter starts with, such as a banner with the Guilde's name or logo. **Member.** Anyone in your Guilde. Members see every menu item above **Admin**. **Membership tier.** A kind of membership the Guilde offers, such as Individual or Household, with its price and length. **Mention.** Typing @ and a member's name in a post, to send them a notice. **Moderation.** The admin page that lists posts members have reported. **Needs your attention.** A card on the **Admin Dashboard** listing work waiting for an admin: new inquiries, reported posts, members who haven't set up their accounts, and unsent drafts. **Not set up.** A member who has been added but hasn't yet chosen a password from their setup email. **Officer.** A person who holds a post in your Guilde, such as president or treasurer. Officers are usually admins. "Make each officer an admin" gives the steps. **Paid up.** A member whose membership hasn't ended, including anyone covered by someone else's household or business membership. **Payout.** A transfer of collected dues from Stripe to your Guilde's bank account. **Pending confirm.** A contact who signed up on your public page and hasn't yet clicked the link in their confirmation email. **Pin.** Keeping a forum thread at the top of the list. **Public, private, secret.** The three settings for who can find your Guilde. "Choose public, private, or secret" explains them. **Public page.** Your Guilde's page on the open web, at network.guildehall.com/g/ followed by your Guilde's short name. People who aren't members see it. **Report.** A member's request that admins look at a post. Reports appear on **Moderation**. **Roster.** The member directory every member can open. Each member chooses what it shows about them, or leaves it altogether. Members who haven't set up their accounts don't appear in it. **Setup email.** The email a new member receives, titled "Set up your account," with a link to choose a password. The link works for seven days. **Stripe.** The payment company that handles dues paid online. Each Guilde has its own Stripe account. **Stripe Dashboard.** Stripe's website for your Guilde's account, where the account's owner and team see payments and payouts and give refunds. **Subscribed.** A contact who receives your letters and hasn't unsubscribed. **Tag.** A label you put on members, such as "Block captain," so that you can show only those members or send them a letter. **Thread.** A conversation in the forum: an opening post and its replies. **Ticket.** A free registration for an event, with a confirmation code to show at the door. **Two-step sign-in.** An optional extra step at sign-in, where you type a code from your phone after your password. **Undeliverable.** An email address that was refused permanently, or whose owner reported a letter as spam. Letters skip it. **Unsubscribed.** A contact or member who has asked not to receive letters. GuildeHall gives admins no way to sign them up again. **Wall.** The Guilde's notice board for short news and reminders. It keeps the 50 most recent posts, not counting posts on the public page. **Walk-in.** Someone an admin registers at the door of a ticketed event. ## Appendix A: Welcome letter to your members Copy this letter, fill in everything in square brackets, and send it as described in task 7. Delete the sentence about dues if your Guilde doesn't take dues online. GuildeHall starts each letter with "Hi" and the member's first name. When you send through GuildeHall, put the subject in **Subject**, and copy the letter from its first paragraph down. When you send from your own email account instead, keep the "Hi everyone" greeting. --- **Subject:** [Guilde name] is moving to GuildeHall Hi everyone, [Guilde name] now has its own member site on GuildeHall Network. We'll use it in place of [what it replaces, such as the spreadsheet and the group email chain]. You'll get a separate email from GuildeHall, if you haven't already, with a link to set up your account. Click the link and choose a password within seven days, before the link expires. If you don't see the email by [date], check your spam folder or let me know, and I'll send it again. Once you've signed in, you can see who's in the group and what's coming up, say whether you're going to events, post on our wall (a bulletin board for the group), and message other members. You can also pay your dues there. Using the site costs you nothing, and it works in your phone's web browser, so there's nothing to install. You decide whether your phone number and address appear on the member list. To choose, click **My Account** in the menu after you sign in. Our next meeting is [date] at [place], and you can tell us on the site whether you're coming. If you have any trouble getting set up, reply to this email or call me at [phone number]. Thanks, [Your name] [Your title], [Guilde name] ## Appendix B: What to have ready for Stripe Print this page and fill it in before you set up dues in task 4. Keep it somewhere safe afterward, or shred it, since it holds bank and personal details. **The Guilde** Legal name, as on its tax records: ______________________________________ Mailing address, as on its tax records: ______________________________________ ______________________________________ Tax ID number (EIN or nonprofit ID), if it has one: ____________________ Incorporated as a nonprofit, or an unincorporated association? ____________________ **The Guilde's bank account** (not a personal account) Bank: ______________________________________ Routing number: ____________________ Account number: ____________________ **You, as the person responsible for the account** Email address for your Stripe login: ______________________________________ Mobile number for text codes: ____________________ You'll also enter your date of birth and the last four digits of your Social Security number. Don't write those here. **Along the way** - To secure your Stripe login, click **your phone** under the **Next** button to get codes by text. If you use an authenticator app, you can scan Stripe's QR code with it instead. - Choose the free option for fraud protection. - Click **Not right now** when Stripe offers help with sales tax, and skip other extras such as Climate. - To stop partway, close the window. **Finish Stripe setup →** on the **Dues** page picks up where you left off.